User Manual

English
9
position or above the instrument near the guitarist’s head. Experiment with different positions and reach the
sound you want.
An all around microphone
What do you want to record with your iRig Mic HD 2? Thanks to its wide gain range it is possible to record an
extremely broad range of instruments: guitar amplifiers, drums, wind instruments — you name it, iRig Mic HD 2
is a true all-around microphone.
Troubleshooting
Sound is distorted.
Check that the input level on iRig Mic HD 2 has been set properly. If the red LED is lighting when you talk or sing
decrease the input level as described in this guide.
The iRig Mic HD 2 status LED is always dark blue and I don’t get any sound.
In order for iRig Mic HD 2 to turn on, a Core Audio-compatible audio app must first be launched on your iOS
device or Mac.
iOS: Be sure you are using an app that works with digital audio input from the Lightning dock connector.
Mac: Be sure you have set “iRig Mic HD 2” as the audio input device on the audio app you are using.
Specifications
Microphone Type: condenser, electret
Polar Pattern: cardioid
Interface Type: USB digital microphone with a built-in low-noise, high-definition preamp.
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Frequency Response: 20 Hz - 20 kHz, -3dB
Maximum Sound Pressure: 125 dB
Sensitivity: -40 dB,10mV/Pa
Windscreen: built-in
Sensitivity: adjustable over a 40 dB range
Built-in low profile gain control
Built-in multicolor LED for status and audio level indication
Connector Type: standard Micro-USB
Headphones output: 1/8” TRS jack
Power and Connection: works with iOS and Mac/PC computer