Bluetooth page turner USER MANUAL
Contents Table of Contents Contents 2 English 3 Safety Information 3 iRig BlueTurn 3 Register your iRig BlueTurn 3 Installation and setup 4 Mode 1 6 Mode 2 7 Mode 3 8 Virtual keyboard in iOS 9 Startup notes 9 Foot-switches backlite 10 Status LED 10 Troubleshooting 10 Specifications 11 Warranty 11 Support and more info 11 Regulatory 12 2
English Safety Information • To reduce risk of internal damage or malfunction, never expose the unit to rain, moisture or excessive humidity. Never let any liquid spill on the unit. • Always remove the batteries if you plan to not use the unit for a long time. • Never expose the unit to a temperature higher than 60°C (140°F) . • Never step over the unit or step on it with your full weight, this might cause permanent damages to the iRig BlueTurn structure and foot switches.
English Installation and setup 1. Install the two AAA batteries into iRig BlueTurn’s battery compartment. It is very important to follow the polarity indicators for the batteries that are indicated on the internal part of the battery compartment. iRig BlueTurn works with Bluetooth LE technology. This allows for extra-low current consumption and very long battery life. 2.
English 3. When the selected mode has been loaded iRig BlueTurn’s BlueTooth LED will start to blink. 4. Pair the iRig BlueTurn with your deivice. For Bluetooth pairing, please refer to your device’s BlueTooth pairing procedure. The BlueTooth LED will remain lit. Please note: iRig BlueTurn is discoverable for 30 seconds at start-up (only after a mode has been selected). If no device has been connected after this time, iRig BlueTurn will hide and must be turned off and on again. 5.
English iRig BlueTurn modes With iRig BlueTurn you can choose between 3 presets (modes) at start-up. Each preset sends different messages. Please consult below for a list of available presets. Mode 1 1. Turn the unit on: Hold one of the two foot switches and flip the ON switch to the ON position. The unit’s two foot switch LEDS will start to blink. HOLD ON 2. Pressing the “left” foot-switch cause iRig BlueTurn to boot in Mode 1. This is the most common MODE for all iOS and Android APPS. MODE 1 3.
English Mode 2 1. Turn the unit on: Hold one of the two foot switches and flip the ON switch to the ON position. The unit’s two foot switch LEDS will start to blink. HOLD ON 2. Pressing the “right” foot-switch cause iRig BlueTurn to boot in Mode 2. This mode is primarily for PC and MAC document applications such as MS Word, Powerpoint, Acrobat, etc. MODE 2 3. Pair the iRig BlueTurn with your device. For Bluetooth pairing, please refer to your device’s BlueTooth pairing procedure.
English Mode 3 1. Turn the unit on: Hold one of the two foot switches and flip the ON switch to the ON position. The unit’s two foot switch LEDS will start to blink. HOLD ON 2. Pressing both the foot-switches will cause iRig BlueTurn to boot in Mode 3. MODE 3 3. Pair the iRig BlueTurn with your device. For Bluetooth pairing, please refer to your device’s BlueTooth pairing procedure.
English Virtual keyboard in iOS Lorem ipsum dolor sit amet, consectetur adipiscin Lorem ipsum dolor sit amet, consectetur adipiscin HOLD 3 sec. Lorem ipsum dolor sit amet, consectetur adipiscin HOLD 3 sec. To turn the virtual keyboard on/off, put the cursor into a text box and press the left foot-switch “up arrow” on the BlueTurn and hold it for at least 3 seconds.
English Status LED This LED indicates the working status of iRig BlueTurn: • OFF: iRig BlueTurn is OFF or the batteries are completely exhausted. • Continuous flashing: iRig BlueTurn is ON and it is waiting to be paired with the device. After 30 seconds, if not paired, iRig BlueTurn will enter sleep mode. To reactivate the unit, turn ON the power switch. • Continuous ON: iRig BlueTurn is ON and paired with the device.
English Specifications • Communication: Bluetooth Low Energy (4.1). • Approximate Range: 33 feet (10 Meters) subject to orientation and other factors. • Two backlit foot switches. • Low-intensity backlighting on all two foot-switches for easy visibility on low light stages. • Long battery duration. • Lightweight sturdy and durable construction. • Size: 126mm x 93mm x 25mm Warranty Please visit: www.ikmultimedia.com/warranty for the complete warranty policy. Support and more info www.
Regulatory Regulatory Model: iRig BlueTurn Model Number: IK000078 U.S.A. Contains Bluetooth shutter with FCC ID : WAP2001 FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.