Keyboard controller for Mac/PC USER MANUAL
Contents Table of Contents Contents 2 English 3 iRig Keys 37 Pro 3 Feautures 3 Overview 4 Register your iRig Keys 37 Pro 4 Installing SampleTank 3 SE 4 Installation and setup 5 Mac or Windows based computers 5 Playing with iRig KEYS 37 PRO 5 Octave Shift 6 5 Volume/Data Knob 3 6 Pitch Bend 8 6 Modulation Wheel 9 6 Pedal 2 7 Prog 7 7 EDIT mode 7 Set the MIDI Transmit Channel 8 Set different velocity (touch) response 8 Assign a specific MIDI Control Change number to the VOL/DATA knob 9 Send specific MID
English iRig Keys 37 Pro Thank you for purchasing iRig KEYS 37 PRO. Your package contains: • iRig KEYS 37 PRO. • Micro USB Cable. • Quick Start Guide. • iRig KEYS 37 PRO Registration Card. • SampleTank 3 SE Registration Card. Feautures • 37-note velocity-sensitive keyboard. • Compatible with Mac and Windows-based computers. • Pitch Bend Wheel. • Modulation Wheel. • Illuminated Octave Up/Down buttons. • Illuminated Program Change Up/Down buttons. • 4 User SETS for quick setup recall.
English Overview 2 3 4 5 6 7 1 8 9 C2 C4 C3 C5 1. Micro-USB port 2. Pedal input 3. Volume/Data knob 4. ON LED 5. Set button 6. Octave buttons 7. Program buttons 8. Pitch wheel 9. Modulation wheel Register your iRig Keys 37 Pro By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will be added to your account.
English Installation and setup Mac or Windows based computers 1. Connect the included Micro USB cable to the Micro USB port on iRig KEYS 37 PRO 1 . 2. Connect the USB plug to a free USB socket on your computer. 3. The ON LED 4 will light up. You are now ready to play virtual instruments installed on your computer from iRig KEYS 37 PRO. 4. Depending on the software you use, you might need to select “iRig KEYS 37 PRO” from the available MIDI IN devices.
English Volume/Data Knob 3 This knob controls MIDI Volume (CC#07) on iRig KEYS 37 PRO by default, so you can use this to control the volume of the instrument you are playing. This control is assignable, so it is also possible to send any other MIDI control change (CC) message. See the chapter “EDIT mode” for more information. Pitch Bend 8 Move this wheel up or down to send Pitch Bend messages. The wheel has a central rest position.
English Most instruments use this message to control the amount of vibrato or tremolo in the sound, but note that this depends solely on how the receiving instrument itself is programmed and not on the iRig KEYS 37 PRO settings. Pedal 2 iRig KEYS 37 PRO supports both Sustain Pedals and Expression Pedals. Connect a NORMALLY OPEN sustain pedal to the jack 2 BEFORE connecting iRig KEYS 37 PRO to the computer. When the pedal is depressed, you will sustain all keyed notes until the pedal is released.
English You can exit EDIT mode at any time by pressing the C2 key marked “CANCEL/NO”. Please refer to the user manual of the control app for detailed information on this. From the app you’ll also be able to select which MIDI messages the external pedals will send. Set the MIDI Transmit Channel MIDI instruments can respond to 16 different MIDI channels. For iRig KEYS 37 PRO to play an instrument, you need the iRig KEYS 37 PRO MIDI Transmit Channel to match the receiving channel of your instrument.
English • Press the F#2 key (VEL), both OCT buttons will flash. • Enter your velocity response selection by using the C3-A3 white keys marked from 0 to 5. • Press the C5 key (ENTER/YES) to confirm your input. Both PROG buttons will flash to show the setting has been accepted, and iRig KEYS 37 PRO will automatically exit EDIT mode. Assign a specific MIDI Control Change number to the VOL/DATA knob By default, the VOL/DATA knob sends MIDI Volume messages which are assigned to MIDI Controller #7.
English Send “All Notes Off” MIDI message Sometimes it may be necessary to stop all notes playing on the current MIDI channel when they are stuck or when controllers are not resetting properly. iRig KEYS 37 PRO can send MIDI CC# 121 + 123 to reset all controllers and stop all notes. To reset all controllers and set all notes off: • Enter EDIT mode (see beginning of Chapter 3). • Press the F#4 key (ALL NOTES OFF).
English Reset iRig KEYS 37 PRO iRig KEYS 37 PRO can be reset to its original factory state. This can be done independently for each one of the SETs or for the normal no-SET mode. To reset iRig KEYS 37 PRO or a SET: • Load the SET you would like to reset, or to not load any SET, you can reset the normal no-SET mode. • Enter EDIT mode (see beginning of Chapter 3). • Press the A#4 key (RESET).
English seconds. The current SET LED will flash to confirm that the SET has been saved. Remember to always save a SET if you have made modifications to it that you would like to keep. When no SET is loaded, iRig KEYS 37 PRO automatically uses the previous settings that were made before loading a SET. Troubleshooting iRig KEYS 37 PRO doesn’t play my instrument even if though it is turned ON. Make sure the MIDI Transmit Channel matches the receiving MIDI channel of your instrument.
Regulatory B 급 기기 ( 가정용 방송통신기자재 ) Class B Equipment (For Home Use Broadcasting & Communication Equipment) 이 기기는 가정용 (B 급 ) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며 , 모든 지역에서 사용할 수 있습니다 . This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas.