User's Manual
Table Of Contents
- I Contents
- II License Agreement
- III What's New in ARC System 2
- What's New in ARC System 2
- Chapter 1 ARC System 2 Overview
- Chapter 2 The ARC System 2 components
- Chapter 3 Setup for measurements
- Chapter 4 Using the ARC 2 Measurement
- 4.1 Opening the ARC 2 Measurement software
- 4.2 Welcome to the ARC System 2
- 4.3 STEP 1 - Microphone Selection
- 4.4 STEP 2 - Set up your Audio I/O
- 4.5 STEP 3 - Put the Measurement Microphone at the main position and adjust levels
- 4.5.1 Microphone orientation
- 4.5.2 Microphone height
- 4.6 STEP 4 - Take measurements
- 4.6.1 Examples of measurement locations in various room types
- 4.6.2 Take Measurements
- 4.7 STEP 5 - Save your system correction
- Chapter 5 Using the ARC 2 Plug-In
- 5.1 ARC 2 Plug-In interface
- 5.1.1 Play Window
- 5.1.2 Measurement menu
- 5.1.3 Target Curve menu
- 5.1.4 Virtual Monitoring Feature
- 5.1.5 Frequency Response Graphs
- 5.1.6 Speaker Icons
- 5.1.7 Peak Meter
- 5.1.8 Correction ON switch and TRIM knob
- 5.1.9 Other controls
- 5.2 Edit Window
- 5.2.1 EQ points
- 5.2.2 Custom 1-4 buttons
- 5.2.3 Apply button
- 5.2.4 Flat button
- 5.2.5 Combined L/R Correction
- 5.2.6 Full Range Bass Correction
- 5.3 Monitor Control Window
- 5.3.1 Main volume knob
- 5.3.2 Dim switch
- 5.3.3 Mute switch
- 5.3.4 Mode selector
- 5.3.5 MIDI Assign of Remote Controls
- 5.4 Opening the ARC 2 Plug-In in your DAW
- 5.5 Using the ARC 2 Plug-In
- 5.6 Suggestions for the best ARC System 2 usage
- Chapter 6 Frequently Asked Questions
- Chapter 7 Troubleshooting
- Chapter 8 Support
4
ARC System 2
I - Contents
5.1.5 Frequency Response Graphs pag. 43
5.1.6 Speaker Icons pag. 44
5.1.7 Peak Meter pag. 44
5.1.8 Correction ON switch and TRIM knob pag. 44
5.1.9 Other controls pag. 45
5.2 Edit Window pag. 46
5.2.1 EQ points pag. 46
5.2.2 Custom 1-4 buttons pag. 47
5.2.3 Apply button pag. 47
5.2.4 Flat button pag. 47
5.2.5 Combined L/R Correction pag. 47
5.2.6 Full Range Bass Correction pag. 48
5.3 Monitor Control Window pag. 50
5.3.1 Main volume knob pag. 50
5.3.2 Dim switch pag. 50
5.3.3 Mute switch pag. 50
5.3.4 Mode selector pag. 51
5.3.5 MIDI Assign of Remote Controls pag. 51
5.4 Opening the ARC 2 Plug-In in your DAW pag. 51
5.5 Using the ARC 2 Plug-In pag. 52
5.6 Suggestions for the best ARC System 2 usage pag. 53
Chapter 6 Frequently Asked Questions pag. 55
Chapter 7 Troubleshooting pag. 59
Chapter 8 Support pag. 63
8.1 User Area pag. 63