User Manual-iRig pro duo

English

iRig Pro DUO LEDs

The four LEDs on iRig Pro DUO give you important information about the unit’s operative status. Each status is

indicated by a different color.

Status / Audio level LEDs

For each channel iRig Pro DUO will show the audio signal level and the status of the unit as follow:

• Both LEDs Off: iRig Pro DUO is not connected to any power source.

• Both LEDs Dark blue: iRig Pro DUO is connected and in standby mode.

• Ch. LED Bright blue: iRig Pro DUO is connected and a signal is present at the input of the corresponding

channel.

• Ch. LED Green: The input signal of the corresponding channel is low.

• Ch. LED Orange: The input signal of the corresponding channel is OK.

• Ch. LED Red: The input signal of the corresponding channel is too high.

Phantom and MIDI LEDs

The two upper LEDs show the phantom power and MIDI status.

Phantom LED

• Off: phantom power is OFF

• Flashing Blue: phantom power is powering ON. To avoid audio bumps iRig Pro DUO is muted while

phantom power is turning ON, so it is normal to not hear any signal until this LED turns steady BLUE when

turning on +48V phantom power.

• Steady Blue: phantom power is ON

• Flashing Red: internal AA batteries are LOW! Before iRig Pro DUO shuts down this LED will start blinking.

This means that the battery level is low and it should be replaced as soon as possible.