Manualshelf

User Manual-iRig pro duo

ManualsBrandsIK Multimedia ManualsAudio Interfaces & SystemsiRig Pro Duo Studio Suite - Music Production Bundle
11121314151617181920
English
13
Dynamic microphones
Before connecting dynamic microphones make sure phantom power is turned OFF. Check that the Phantom
Power switch is in the OFF position and that the Phantom LED is turned off.
Condenser microphones
Most condenser microphones require external phantom power. If phantom power is ON, switch it OFF, and then
connect your microphone. Turn phantom power ON only after the microphone is connected. Once it’s turned
ON, check that the phantom power LED has become blue (it will flash for a few seconds before staying on). If
the LED doesn’t turn blue, check that working batteries are inserted in the iRig Pro DUO’s battery compartment
on the bottom side, and that an application that is using iRig Pro DUO is open. Phantom power will NOT turn
ON if iRig Pro DUO is in standby (status LED lit up dark blue).