User's Manual

English
12
Bluetooth pairing
The iLoud Micro Monitor uses Bluetooth® to stream high quality audio from your Bluetooth® enabled device
without the need to connect any audio cable. In order for your device to work with the iLoud Micro Monitor it
must first be paired. To pairing your device:
• Turn the back panel volume control counter-clockwise to the -INF position.
• With the iLoud Micro Monitor and your Bluetooth® device powered on: press the PAIRING button on the rear
panel of the Left speaker to make the speaker discoverable. The front panel indicator will slowly flash blue.
• In the settings of your Bluetooth® device, set it to “discover” available devices.
• From the Bluetooth® device list, select the “iLoud Micro Monitor” device.
• iLoud Micro Monitor indicates that pairing is complete when the indicator returns steady white. You can now
stream audio from your device to the iLoud Micro Monitor: only when there’s an audio streaming the LED
turns steady blue.
• With the volume control on your Bluetooth® device turned up, play some music and slowly raise the iLoud
Micro Monitor volume control until you have reached the desired level.
Volume
This potentiometer allows you to adjust the input level of the audio source.
Power switch and DC input
Power switch: this rocker-style switch allows to power on and off iLoud Micro Monitor.
DC IN: connect the (included) PSU to this DC socket.
IMPORTANT: before to connect/disconnect the DC input, make sure that the power switch is set to Off.