User's Manual

English

7. Play audio from your audio source and slowly raise the volume of the iLoud Micro Monitor to a comfortable

listening level.

8. If needed, adjust the speakers response with the dedicated controls on the rear panel of the left speaker.

9. If needed adjust the speakers inclination with the tilting pads.

Note: Before plugging in and turning on, remember the “last on, first off” rule of powered speakers. When

powering up your system, be sure that all the wires are connected, turn your mixer/interface and any other

outboard gear on, and then last turn on your iLoud Micro Monitor. When powering down, turn your iLoud Micro

Monitor off first and then your mixer/interface and outboard gear.