User Manual

English
15
• at this point the calibration test signals production will start. During this time, the front LED will stay steady
ON blue. IMPORTANT: during the measurement process make sure that the environment is a silent as
possible, do not touch the speaker or the microphone, and make sure that the overall room setup is as
similar as possible to the one that will be used during normal iLoud MTM usage.
• following the audio sweeps, during the calculation process, the front LED will start to blink BLUE;
• When the process finishes, if the calibration has ended successfully, the front LED will blink GREEN
for 4 seconds and the back CAL LED will turn steady ON; if, for some reason, the calibration ended
unsuccessfully, the front LED will blink RED for 4 seconds and the back CAL LED won’t turn ON. In this case
try to perform another calibration.