User Manual

English
7
Installation and setup
We recommend using high quality audio cables to guarantee optimal performance. It is important to ensure that
the speakers stand firmly on a solid surface. Please note that the loudspeakers will need a few days to achieve
optimum sonic performance.
1. Make sure that the volume control of iLoud MTM is set to minimum. Make sure that the ON/OFF switch on
the rear panel is set to OFF.
2. Install the adjustable foot on the bottom of the iLoud MTM with the locking key. You can adjust the
inclination of the speaker from 0° to 20°. Once reached the desired inclination angle, tighten the locking
key. IMPORTANT: make sure that you tighten the locking key on the correct threaded insert at the bottom
of iLoud MTM. The second threaded insert is intended for installing the iLoud MTM on top of a microphone
stand.