User's Manual

English

Microphone stand mounting

Thanks to the thread adapter on the bottom of the speaker, iLoud MTM can be mounted on any standard 3/8”

microphone stand. This allows you to place the speakers at the perfect height and, most important, helps to

reduce the typical reflections of the desktop (or shell) and, consequently, improves the frequency response/

linearity of the speaker.

DFU mode

To update the firmware of your iLoud MTM you need to enter in DFU mode. To update your iLoud MTM:

• connect your iLoud MTM to a computer with a USB cable;

• enter the DFU mode: to enter the DFU mode, keep pressed the SENS button while powering up the iLoud

MTM. While in DFU mode the front LED will start blinking white.

• Open the firmware updater application (available at www.ikmultimedia.com/iloudmtm) and follow the

displayed instructions.

• The iLoud MTM needs to be restarted. Power off the unit, wait for at least 20 seconds and then turn it on

again.

• The iLoud MTM is now updated.