User's Manual

English
14
High frequency filter
This switch controls the high frequency level using a shelf-type EQ. The level can be set to 0dB or +2dB (above
4kHz).
Low frequency filter
This switch controls the low frequency level using a shelf-type EQ. The level can be set to 0dB or -3dB (below
250Hz).
This filter is used to adjust the proximity effect of side walls and ceiling. Use this filter whenever the acoustics of
your room cause problems in the low frequency range.
LED
The frontal LED on the Left speaker will show important information about iLoud Micro Monitor’s status:
Steady white: iLoud Micro Monitor is ON.
Steady red: clipping.
Flashing blue: iLoud Micro Monitor is pairing with your Bluetooth device.
Steady blue: the Bluetooth connected device is streaming audio to the speakers.
Drivers
Woofer
The woofer unit is a custom 3” paper cone capable to delivers balanced mid- and low-frequency response.
Tweeter
By employing a specially developed 3/4” silk cone with neodymium magnet, the tweeter can deliver an
extremely natural response on the top-end.