User Manual

English
13
Troubleshooting
iRig Mic Field does not activate when plugged into my iOS device
Verifythatyou’reusingacompatibledevice.
Disconnectandre-connectiRigMicFieldtoverifythatyouhavesecurelyconnectediRigMicFieldtotheiOSdevice.
Sound is distorted.
CheckthattheinputleveloniRigMicFieldhasbeensetproperly.IftheREDLEDislightingwhenyourecordoniRig
MicField,decreasetheinputlevelasdescribedinthisguide.
The iRig Mic Field status LED is always dark blue and I don’t get any sound.
InorderforiRigMicFieldtoturnON,aCoreAudio-compatibleaudioappmustfirstbelaunchedonyouriOSdevice.
BesureyouareusinganappthatworkswiththedigitalaudioinputfromtheLightningdockconnector.
Specifications
-Digitalstereofieldrecordingmicrophone
-Transducertype:Condenser,electret
-PolarPatterns:Cardioid
-Capsulesconfiguration:Nearcoincidentpair
-FrequencyResponse:40Hz-20kHz
-MaxSPL:115dBSPL
-Resolution&SampleRate:24bit,44.1kHzand48kHz
-Gainrange:48dB
-Power:PoweredbytheconnectediOSdevice
-Connector:Lightningconnector
-Rotationsystem:90°foroptimalaudio/videopositioningandlocksinplace
-Controls:GainthumbwheelandmulticolorLEDindicator
-Audioconnections:3,5mmheadphoneoutputjack
-Size:57,5mm(H)x50mm(W)x16mm(D)
Warranty
Pleasevisit:
www.ikmultimedia.com/warranty
forthecompletewarrantypolicy.
Support and more info
www.ikmultimedia.com/support
www.irigmicfield.com
Appleisnotresponsiblefortheoperationofthisdeviceoritscompliancewithsafetyandregulatorystandards.