Universal microphone interface for smartphone and tablets USER MANUAL
Contents Table of Contents Contents 2 English 4 iRig PRE 4 Register your iRig PRE 4 Installation and setup 5 Usage tips 9 Specifications 10 Warranty 10 Support and more info 10 Français iRig PRE 11 Enregistrement de l’iRig PRE 11 Mise en route 12 Astuces d’utilisation 16 Spécifications 17 Garantie 17 Informations et support 17 Español iRig PRE 18 Registre su iRig PRE 18 Para Empezar 19 Consejos para el uso 23 Especificaciones 24 Garantía 24 Servicio Técnico y Más Información 24 Italiano iRig PRE 25 Reg
Contents Support und weitere Informationen 38 日本語 iRig PRE 39 オンライン・レジストレーション 39 基本的な使い方 40 使用上のヒント 44 仕様 45 保証 45 サポートと詳細は 45 中文 簡体字 iRig PRE 46 注册你购买的iRig PRE 46 入门指南 47 使用提示 51 技术参数 52 保修 52 获取更多信息 52 3
English CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. CAUTION: iRig PRO can ONLY be used with: - Consumer grade, non-rechargeable CARBON-ZINC or ALKALINE batteries. - Consumer grade, Ni-MH rechargeable batteries up to a maximum capacity of 300mAh.
English Installation and setup iRig PRE can be used with your iPhone, iPod touch, iPad or Android device. 1. Insert the 9V battery into the Battery compartment on the bottom side of iRig PRE. Gently open the battery cover by sliding it in the direction of the arrow near the “OPEN” text. Once the compartment is open, gently push the 9V battery into place aligning + and - polarity as shown. Depending on the brand and type of battery, it may be necessary to hold it in place while sliding in the cover again.
English 2. Connect your microphone to the XLR input connector 3. Connect iRig PRE to your mobile device headphone socket. OFF 1 2 XLR MIC 4. Turn the iRig PRE ON by sliding the power switch to the ON position. The green LED will light.
English 5. If you are using a microphone that needs phantom power (like most condenser microphone), slide the power switch to the upper position (marked +48V) to turn phantom power ON. The red LED will light. +48V iRig Recorder VocaLive ikdownloads.com/irigpre App Store is a service mark of Apple Inc. 6. Download the iRig Recorder or the VocaLive apps from the App Store or from the Google Play Store, and install them on your mobile device.
English 7. You are now able to record using your preferred microphone on your mobile device. To get optimal results, you need to properly adjust the GAIN control. Check the input level meter on the app you are using to record (like iRig Recorder). This level meter should peak as high as possible but should never reach the maximum or clipping level. To increase the iRig PRE gain, rotate the knob toward the top of the unit. To decrease the iRig PRE gain, rotate the knob toward the bottom of the unit.
English 8. If you need to monitor what you are recording, connect your headphones to this socket. Remember that this output replicates the mobile device headphone output, so you will hear audio here only with applications that support real-time input/output pass-through like iRig Recorder. 9. If you use iRig PRE to connect a vocal microphone for vocal performance, you will need to use VocaLive app that provides high quality effects especially tailored for vocals.
English Specifications • Frequency response: from 20 Hz to 20 KHz +/- 1.5dB • Noise: -98dB fullband, phantom power ON • Max output level: 2 Vrms • Distortion: 0.025% THD • Phantom max current: 6mA • Battery duration (Alkaline 9V cell): approx 30 hours when phantom power is off, approx 10 hours when phantom power is on. Warranty Please visit: www.ikmultimedia.com/warranty for the complete warranty policy. Support and more info www.ikmultimedia.com/support www.irigpre.
Français ATTENTION: RISQUE D’EXPLOSION SI LES PILES SONT REMPLACÉES PAR D’AUTRES PILES DE TYPE INCORRECT. JETER LES PILES USAGÉES SELON LES INSTRUCTIONS. ATTENTION: l’iRig PRO DOIT ÊTRE UTILISÉ EXCLUSIVEMENT AVEC des piles de type suivant : - Piles CARBON-ZINC ou ALCALINES non rechargeables. - Batteries rechargeables Ni-MH jusqu’à une capacité maximum de 300mAh. Cet AVIS remplace toute autre indication sur les types de batteries acceptées pouvant figurer dans le Guide de Prise en Main Rapide ou ailleurs.
Français Mise en route L’iRig PRE est conçu pour être utilisé avec votre iPhone, iPod touch, iPad ou appareil Android. 1. Insérez la batterie 9 volts dans son compartiment situé sous votre iRig PRE. Ouvrez sans forcer le clapet de la batterie en le faisant glisser dans le sens de la flèche, où figure l’inscription “OPEN”. Une fois le compartiment ouvert, placez-y délicatement la batterie dans le sens indiqué afin de respecter la polarité.
Français 2. Branchez votre microphone sur la prise XLR input. 3. Reliez l’iRig PRE à la prise casque de votre appareil mobile. OFF 1 2 XLR MIC 4. Allumez votre iRig PRE en faisant glisser l’interrupteur de mise sous tension sur la position ON. La LED verte doit s’allumer.
Français 5. Si vous utilisez un micro nécessitant une alimentation fantôme (comme la plupart des micros électrostatiques), faites glisser l’interrupteur de mise sous tension sur la position suivante (marquée +48V) afin de mettre en route l’alimentation fantôme. La LED rouge doit alors s’allumer. +48V iRig Recorder VocaLive ikdownloads.com/irigpre App Store is a service mark of Apple Inc. 6.
Français 7. A présent vous êtes à même d’effectuer des enregistrements à l’aide du micro que vous aurez connecté à votre appareil mobile. Pour obtenir une qualité sonore optimale, ajustez correctement le gain d’entrée. Contrôlez le niveau d’entrée depuis l’application que vous utilisez pour enregistrer (par exemple iRig Recorder). L’indicateur de niveau doit moduler autant que possible tout en restant en dessous du seuil de saturation.
Français 9. Si vous utilisez l’iRig PRE pour chanter en live avec un micro voix, utilisez l’application VocaLive qui offre des effets de grande qualité conçus pour la voix. Dans ce cas de figure, reliez directement votre appareil au système de sonorisation. Astuces d’utilisation • Pour minimiser le niveau de bruit de fond, ajustez correctement le gain d’entrée. S’il est trop bas, le niveau du signal audio sera trop bas, et remonter le volume augmentera également le niveau du bruit de fond.
Français Spécifications (mesures effectuées avec le gain en position moyenne) • Réponse en fréquences : 20 Hz à 20 kHz +/- 1.5dB • Niveau de bruit : -98 dB en pleine bande, alimentation fantôme enclenchée • Niveau max. de sortie : 2 Vrms • Distorsion : 0.025% THD • Courant max de l’alimentation fantôme : 6mA • Autonomie (batterie alkaline 9V) : environ 30 heures sans alimentation fantôme, et environ 10 heures avec alimentation fantôme enclenchée. Garantie Allez sur : www.ikmultimedia.
Español PRECAUCIÓN: RIESGO DE EXPLOSIÓN SI LA BATERÍA SE REPONE CON EL TIPO INCORRECTO. DISPONGA DE LAS BATERÍAS USADAS DE ACUERDO A LAS INSTRUCCIONES. PRECAUCIÓN: iRig PRO se puede usar SÓLO con: - Baterías de grado de consumidor no-recargables CARBÓN-ZINC o ALKALINAS. - Baterías de grado de consumidor Ni-MH recargables a una capacidad máxima de 300mAh. Esta PRECAUCIÓN cancela y reemplaza todas las otras indicaciones de tipos de batería que aparecen en la guía de inicio rápido u otra documentación.
Español Para Empezar iRig PRE se puede usar con su iPhone, iPod touch, iPad o dispositivo Android. 1. Inserte la batería de 9V al compartimiento de la batería en el panel inferior del iRig PRE. Deslice cuidadosamente la cubierta de la batería hacia la dirección de la flecha con el texto “OPEN”. Cuando el compartimiento esté abierto, coloque la batería cuidadosamente, alineando la polaridad + y - como se muestra aquí.
Español 2. Conecte su micrófono a la entrada del conector XLR. 3. Conecte iRig PRE a la salida de auriculares de su dispositivo móvil. OFF 1 2 XLR MIC 4. Encienda el iRig PRE deslizando el interruptor a la posición ON. La luz verde LED se encenderá.
Español 5. Si se está usando un micrófono que requiere poder phantom (como la mayoría de micrófonos condensadores), deslice el interruptor a la posición superior (+48V) para encender el poder phantom. La luz roja LED se encenderá. +48V iRig Recorder VocaLive ikdownloads.com/irigpre App Store is a service mark of Apple Inc. 6. Descargue e instale el app iRig Recorder o VocaLive del App Store o del Google Play Store a su dispositivo móvil.
Español 7. Ahora puede grabar usando su micrófono preferido en su aparato móvil. Para el mejor resultado, se debe ajustar el control de ganancia (GAIN) adecuadamente. Verifique el medidor de nivel de entrada que está utilizando para grabar (como iRig Recorder). Este medidor debe llegar al mayor nivel posible, pero nunca debe llegar al máximo nivel. Para incrementar la ganancia de iRig PRE, gire la perilla hacia arriba. Para reducir la ganancia de iRig PRE, gire la perilla hacia abajo. 8.
Español 9. Si está usando iRig PRE para conectar un micrófono para vocales, se necesitará usar el app VocaLive que proporciona efectos de audio de alta calidad específicamente diseñados para vocales. En este caso, conecte su mezclador o sistema de altavoces a esta conexión. Consejos para el uso • Para prevenir ruido excesivo en sus grabaciones, siempre configure la ganancia (GAIN) adecuadamente.
Español Especificaciones (medición con la perilla GAIN en posición central) • Respuesta de frecuencia: de 20 Hz a 20 kHz +/- 1.5 dB • Ruido: -98 dB banda entera, poder phantom ENCENDIDO • Máximo nivel de salida: 2 Vrms • Distorsión: 0.025% THD • Máxima corriente de poder phantom: 6mA • Duración de batería (célula Alcalina 9V): aprox. 30 horas sin poder phantom, aprox. 10 horas con poder phantom encendido. Garantía Por favor visite: www.ikmultimedia.
Italiano ATTENZIONE: RISCHIO DI ESPLOSIONE SE LA BATTERIA VIENE SOSTITUITA CON UNA DI TIPO NON CORRETTO. SMALTIRE LE BATTERIE SECONDO LE ISTRUZIONI. ATTENZIONE: iRig PRO può essere utilizzato ESCLUSIVAMENTE con: - Batterie non ricaricabili ZINCO-CARBONE o ALCALINE di tipo comune. - Batterie ricaricabili Ni-MH di tipo comune con capacità masima di 300mAh.
Italiano Come iniziare iRig PRE può essere usato con il tuo iPhone, iPod touch, iPad o dispositivo Android. 1. Inserisci la batteria 9V nell’apposita sede posizionata sotto iRig PRE. Apri delicatamente il coperchio della sede, facendolo scivolare nella direzione indicata dalla freccia vicina alla scritta “OPEN”. Dopo aver rimosso il coperchio, inserisci la batteria 9V allineando le polarità + e – come illustrato.
Italiano 2. Collega il tuo microfono al connettore XLR. 3. Collega iRig PRE all’ingresso cuffie del tuo dispositivo mobile. OFF 1 2 XLR MIC 4. Attiva iRig PRE spostando l’interruttore su ON. Si accenderà il LED verde.
Italiano 5. Se stai utilizzando un microfono che necessita di phantom power (come la maggior parte dei microfoni a condensatore), sposta l’interruttore sulla posizione più in alto (indicata con +48V) per attivare la phantom power. Si accenderà il LED rosso. +48V iRig Recorder VocaLive ikdownloads.com/irigpre App Store is a service mark of Apple Inc. 6. Scarica le app iRig Recorder o VocaLive dall’App Store o dal Google Play Store e installale sul tuo dispositivo mobile.
Italiano 7. Ora puoi registrare utilizzando il tuo microfono preferito con il tuo dispositivo mobile. Per ottenere il risultato migliore, devi regolare correttamente il controllo di GAIN. Controlla il livello di input nell’app che utilizzi per registrare (ad esempio iRig Recorder). Il livello deve essere il più alto possibile, ma non deve mai raggiungere il livello massimo o di clipping. Per aumentare il livello di gain di iRig PRE, ruota il potenziometro GAIN verso l’alto.
Italiano 9. Se vuoi connettere un microfono per voce ad iRig PRE, ti consigliamo di utilizzare l’app VocaLive, in modo da avere a disposizione effetti di qualità professionale, creati apposta per la voce. In questo caso, connetti il mixer o direttamente l’impianto a questa uscita. Consigli d’uso • Per evitare che le tue registrazioni abbiano un eccessivo rumore di fondo, assicurati sempre che il potenziometro di GAIN sia impostato correttamente.
Italiano Specifiche (misure effettuate con il livello di GAIN posizionato a metà) • Risposta in frequenza: da 20 Hz a 20 kHz +/- 1.5dB • Rumore: -98 dB fullband, con phantom power attiva • Livello massimo di uscita: 2 Vrms • Distorsione: 0.025% THD • Massima corrente della phantom power: 6mA • Durata della Batteria (Alcalina 9V): circa 30 ore con phantom power non attiva, circa 10 ore con phantom power attiva. Garanzia Visita: www.ikmultimedia.com/warranty per le norme di garanzia.
Deutsch VORSICHT: EXPLOSIONSRISIKO WENN DIE BATTERIE DURCH EINEN FALSCHEN TYP ERSETZT WIRD. ENTSORGEN SIE AUFGEBRAUCHTE BATTERIEN ENTPRECHEND DEN BEIGELEGTEN HINWEISEN. VORSICHT: iRig PRO kann AUSSCHLIESSLICH mit folgenden Batterietypen verwendet werden: - Herkömmlichen, nicht wiederaufladbaren ZINK-KOHLE- oder ALKALINE-Batterien - Herkömmlichen, wiederaufladbaren NI-MH-Batterien mit maximaler Kapazität von 300mAh.
Deutsch Erste Schritte Das iRig PRE kann mit einem iPhone/iPod touch/iPad oder Android-Gerät verwendet werden. 1. Legen Sie die 9V Batterie in den dafür vorgesehenen Slot auf der Bodenplatte des Gerätes ein. Öffnen Sie das Batteriefach vorsichtig, indem Sie es in Pfeilrichtung schieben (neben der Schrift “OPEN“). Nachdem Sie das Fach geöffnet haben, legen Sie die 9V Batterie vorsichtig ein, wobei Sie auf die richtige + und – Polarität achten müssen.
Deutsch 2. Schließen Sie Ihr Mikrofon an die XLR-Buchse des iRig PRE an. 3. Schließen Sie das iRig PRE an die Kopfhörerbuchse von Ihrem Mobilgerät an. OFF 1 2 XLR MIC 4. Schalten Sie das iRig PRE an, indem Sie den ON/OFF-Schalter in die ON Stellung schieben. Die grüne LEDAnzeige wird anleuchten.
Deutsch 5. Falls Sie ein Mikrofon benutzen, das Phantomspeisung benötigt (wie die meisten Kondensatormikrofone), schieben Sie den Schalter in die obere Stellung (+48V), um die Phantomspeisung zu aktivieren. Die rote LED-Anzeige wird anleuchten. +48V iRig Recorder VocaLive ikdownloads.com/irigpre App Store is a service mark of Apple Inc. 6. Laden Sie die iRig Recorder oder VocaLive Apps im App Store oder Google Play Store herunter, und installieren Sie sie auf Ihrem Mobilgerät.
Deutsch 7. Sie sind jetzt in der Lage, mit Ihrem Mikrofon auf Ihrem Mobilgerät aufzunehmen. Für beste Ergebnisse achten Sie auf die korrekten GAIN-Einstellungen. Überprüfen Sie den Input-Level-Regler in der verwendeten App (zum Beispiel iRig Recorder). Dieses Level sollte möglichst hoch sein, jedoch nicht seinen Höhepunkt oder die Clipping-Schwelle erreichen. Um den Gain zu erhöhen, drehen Sie den Gain-Knopf in Richtung Geräteoberteil.
Deutsch 9. Wenn Sie das iRig PRE zum Anschließen eines Gesangsmikrofons während Auftritte benutzen, benötigen Sie die VocaLive App, die hochwertige Effekte speziell für Gesang bietet. Schließen Sie Ihren Mixer oder Ihre PA-Anlage an diese Ausgangsbuchse an. Tipps • Um übermäßige Geräusche in Aufnahmen zu vermeiden, stellen Sie den GAIN korrekt ein. Falls der Gain zu niedrig ist, sind Aufnahmen zu leise und wenn Sie sie innerhalb einer App aufpeppen wollen, fangen sie an zu rauschen.
Deutsch Technische Daten (gemessen mit GAIN in der Mittel-Stellung) • Frequenzgang: von 20 Hz bis 20 kHz +/- 1.5dB • Geräuschpegel: -98 dB (fullband), Phantomspeisung ON • Maximum Output-Level: 2 Vrms • Verzerrung: 0.025% THD • Maximale Stromstärke (Phantomspeisung): 6mA • Batteriedauer (Alkaline 9V Cell): Circa 30 Stunden mit abgeschalteter Phantomspeisung (OFF), circa 10 Stunden mit Phantomspeisung. Gewährleistung Bitte besuchen Sie www.ikmultimedia.com/warranty für weitere Informationen.
日本語 警告:不適切な電池をご利用になると破裂、 発火の恐れがあります。 下記以外の電池をお使いの方は、 すみやかに破棄してください。 警告:iRig PROでお使いいただける電池は、 下記のみです。 - 充電方式ではない民生用のマンガン乾電池、 アルカリマンガン乾電池 - 最大容量300mAh以下のニッケル水素充電池 本警告は、 付属のクイック・スタート・ガイドなど他の箇所に書かれた電池に関する記述を置き換え、 優先されるもの となります。 . iRig PRE iRig PREをお買い上げいただき、 ありがとうございます。 ご使用になる前に、 同梱物をお確かめ下さい。 : • iRig PRE本体 • 9V電池 • マジックテープ • クイック・スタート・ガイド • レジストレーション・カード.
日本語 基本的な使い方 iRig PREをiPhone、 iPod touch、 iPad、 Android機器に接続して使います。 次のページの図の番号を参照しながらお読 みください。 . 1. iRig PRE下部の電池ボックスに9V電池を装着します。 蓋を空ける時は 「OPEN」 の矢印方向にスライドさせてくだ さい。 蓋が開いたら、 9V電池の+/-端子を間違えないように接続してください。 蓋を閉める時は矢印の逆方向にス ライドさせてください。 電池の形状により、 電池を押さえながら閉める必要があるかもしれません。 .
日本語 2. マイクロフォンをXLRケーブルに挿して、 iRig PRE下部のXLR端子に接続してください。 . 3. iRig PREのミニ・ケーブルをモバイル機器のヘッドフォン端子に接続してください。 . OFF 1 2 XLR MIC 4.
日本語 5. ファンタム電源が必要なコンデンサー・マイクをお使いの場合は、 iRig PREの電源スイッチを 「+48V」 の位置に合 わせてください。 赤い+48V LEDが点灯します。 . +48V iRig Recorder VocaLive ikdownloads.com/irigpre App Store is a service mark of Apple Inc. 6. App StoreSM、 Google PlayにてiRig Recorder、 VocaLiveなど外部マイク対応アプリをダウンロードして、 モバイル 機器にインストールしてください。 t.
日本語 7. iRig Recorderなどのレコーディング・アプリを開いたら、 マイクの前で音を出して、 レベル・メーターを見ながら iRig PRE右側のGAINダイアルを調整してください。 上方向に回すとゲインが上がり、 下方向に回すとゲインが絞 られます。 最大の音量時にクリッピングしないように注意しながら、 できるだけゲインを上げると良いでしょう。 . 8. レコーディング中の音をモニターしたい時は、 iRig PRE左上のヘッドフォン端子にヘッドフォンを接続してくださ い。 モバイル機器のヘッドフォン・アウトの信号がスルー出力されます。 ここで音が聞けるのは、 iRig Recorderな ど、 レコーディング中の入力音をリアルタイムにモニター可能なアプリの使用時に限られますのでご注意くださ い。 .
日本語 9.
日本語 仕様 GAIN=中間位置にて測定 • 周波数特性:20 Hz ~ 20 kHz +/- 1.5dB • ノイズ:-98 dB 全帯域 (ファンタム電源ON) • 最大出力レベル:2 Vrms • 歪:0.025% THD • ファンタム電源最大電流:6mA • 電池駆動時間 (9Vアルカリ電池使用時) :約30時間 (ファンタム電源OFF) 、 約10時間 (ファンタム電源ON) . 保証 保証ポリシーに関しては www.ikmultimedia.com/warranty を参照してください。 サポートと詳細は www.ikmultimedia.com/support www.irigpre.
中文 簡体字 警告:使用错误型号的电池将会有爆炸危险,废弃电池请参照说明进行处置。 警告:iRig PRO只能使用: -消费级,不可充电的碳锌电池或碱性电池。 -消费级,最大容量为300mAh的镍氢充电电池 。 此警告替代所有出现在产品快速指南中或其他地方的电池使用说明。. iRig PRE 感谢您购买了iRig PRE,本指南能帮助您快速了解产品的操作,包装盒内包含了以下物品: • iRig PRE • 9V 电池 • 尼龙搭扣 • 产品快速操作指南 • 注册卡. 1x 1x 1x 通过iRig PRE你可以连接各种专业的麦克风到您的iPhone,iPod touch,iPad或Android设备。由于拥有较宽 的增益调范围并且能提供幻象电源,您可以连接各类麦克风:电容式、动圈式以及铝带式。 注册你购买的iRig PRE 通过注册,您将可以得到技术支持和相应的保修服务,并且能免费拥有一个JamPoints™账号,通过它您可以在 以后购买IK产品时享受一定的折扣!同时还能获取相关资讯和最新动态。 注册地址: www.ikmultimedia.
中文 簡体字 入门指南 iRig PRE可与iPhone,iPod touch,iPad或Android设备连接使用。 1.
中文 簡体字 2. 连接麦克风到卡侬端口。 3. 连接iRig PRE到移动设备耳机插孔。 OFF 1 2 XLR MIC 4.
中文 簡体字 5. 如果您使用的麦克风需要供电(如大多数的电容式麦克风),将电源开关滑至最上端(注明+48V) 的位置 上,红色的LED灯亮起。 +48V 在App Store或Google Play Store软件商店下载iRig Recorder或VocaLive软件,安装在移动设备上。 iRig Recorder VocaLive ikdownloads.com/irigpre App Store is a service mark of Apple Inc. 6.
中文 簡体字 7.
中文 簡体字 8. 如果需要对所录制的内容进行监听,可将耳机插入耳机插孔。但请注意,此输出音效是复制了移动设备 上的耳机输出,因此,只有通过使用支持实时输入/输出的应用软件如:iRig Recorder,才能听到准确的音频 效果。 9.
中文 簡体字 技术参数 (增益在中间位置时,测量所得的参数) · 频率响应:从 20 赫兹到20 千赫 +/- 1.5分贝 · 噪音范围:开启电源,-98分贝 · 最大电压:2 Vrms · 失真范围:0.025% 谐波失真率 · 最大电流:6mA · 电池持续时间(9V碱性电池):当供电关闭可以使用近30小时,开启供电可以使用近10小时。 保修 请浏览网页: www.ikmultimedia.com/warranty 了解完整的质量保修条款, 获取更多信息 www.ikmultimedia.com/support www.irigpre.
IK Multimedia IK Multimedia Production Srl Via dell’Industria 46, 41122 Modena, Italy Phone: +39-059-285496 - Fax: +39-059-2861671 IK Multimedia US LLC 1153 Sawgrass Corporate Parkway, Sunrise, FL 33323 Phone: 954-846-9101 - Fax: 954-846-9077 IK Multimedia Asia TB Tamachi Bldg. 1F, MBE #709, 4-11-1 Shiba, Minato-ku, Tokyo 108-0014 www.ikmultimedia.com/contact-us iRig® PRE, VocaLive™ and iRig® Recorder are trademarks or registered trademarks property of IK Multimedia Srl.