Universal microphone interface for smartphone and tablets USER MANUAL
Contents Table of Contents Contents 2 English 4 iRig PRE 4 Register your iRig PRE 4 Installation and setup 5 Usage tips 9 Specifications 10 Warranty 10 Support and more info 10 Français iRig PRE 11 Enregistrement de l’iRig PRE 11 Mise en route 12 Astuces d’utilisation 16 Spécifications 17 Garantie 17 Informations et support 17 Español iRig PRE 18 Registre su iRig PRE 18 Para Empezar 19 Consejos para el uso 23 Especificaciones 24 Garantía 24 Servicio Técnico y Más Información 24 Italiano iRig PRE 25 Reg
Contents Support und weitere Informationen 38 日本語 iRig PRE 39 オンライン・レジストレーション 39 基本的な使い方 40 使用上のヒント 44 仕様 45 保証 45 サポートと詳細は 45 中文 簡体字 iRig PRE 46 注册你购买的iRig PRE 46 入门指南 47 使用提示 51 技术参数 52 保修 52 获取更多信息 52 3
English CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. CAUTION: iRig PRO can ONLY be used with: - Consumer grade, non-rechargeable CARBON-ZINC or ALKALINE batteries. - Consumer grade, Ni-MH rechargeable batteries up to a maximum capacity of 300mAh.
English Installation and setup iRig PRE can be used with your iPhone, iPod touch, iPad or Android device. 1. Insert the 9V battery into the Battery compartment on the bottom side of iRig PRE. Gently open the battery cover by sliding it in the direction of the arrow near the “OPEN” text. Once the compartment is open, gently push the 9V battery into place aligning + and - polarity as shown. Depending on the brand and type of battery, it may be necessary to hold it in place while sliding in the cover again.
English 2. Connect your microphone to the XLR input connector 3. Connect iRig PRE to your mobile device headphone socket. OFF 1 2 XLR MIC 4. Turn the iRig PRE ON by sliding the power switch to the ON position. The green LED will light.
English 5. If you are using a microphone that needs phantom power (like most condenser microphone), slide the power switch to the upper position (marked +48V) to turn phantom power ON. The red LED will light. +48V iRig Recorder VocaLive ikdownloads.com/irigpre App Store is a service mark of Apple Inc. 6. Download the iRig Recorder or the VocaLive apps from the App Store or from the Google Play Store, and install them on your mobile device.
English 7. You are now able to record using your preferred microphone on your mobile device. To get optimal results, you need to properly adjust the GAIN control. Check the input level meter on the app you are using to record (like iRig Recorder). This level meter should peak as high as possible but should never reach the maximum or clipping level. To increase the iRig PRE gain, rotate the knob toward the top of the unit. To decrease the iRig PRE gain, rotate the knob toward the bottom of the unit.
English 8. If you need to monitor what you are recording, connect your headphones to this socket. Remember that this output replicates the mobile device headphone output, so you will hear audio here only with applications that support real-time input/output pass-through like iRig Recorder. 9. If you use iRig PRE to connect a vocal microphone for vocal performance, you will need to use VocaLive app that provides high quality effects especially tailored for vocals.
English Specifications • Frequency response: from 20 Hz to 20 KHz +/- 1.5dB • Noise: -98dB fullband, phantom power ON • Max output level: 2 Vrms • Distortion: 0.025% THD • Phantom max current: 6mA • Battery duration (Alkaline 9V cell): approx 30 hours when phantom power is off, approx 10 hours when phantom power is on. Warranty Please visit: www.ikmultimedia.com/warranty for the complete warranty policy. Support and more info www.ikmultimedia.com/support www.irigpre.
