User's Manual

English
7
8. Connect your headphones to the Headphone Output jack on iRig Pre 2 and set its level with the dedicated
volume wheel.
Usage tips
• To avoid having too much noise in the recordings, always set the GAIN properly. If the GAIN is too low,
recordings will be too quite, and when boosted within the apps they will become too noisy. If the GAIN is too
high, recordings will be distorted.
• Be CAREFUL not to turn the phantom power ON with passive ribbon microphones as the current that will
flow into the ribbon element could damage it. When using ribbon mics, turn ON phantom power ONLY if the
microphone specifications clearly say it’s needed.
• If you hear feedback issues when using high GAIN settings, lower the mobile device volume with the device
volume buttons.