User's Manual

UNO Synth

2- Turning the unit ON/OFF - Calibration process

2 – Turning the unit ON/OFF - Calibration process

WhentheunitispoweredON,itautomaticallystartsthefirsttuningandcapacitancesensingcalibration.During

thecalibrationthedisplaywillfirstshowastatic“UNO,”thenblink“CAL.”Attheendofthecalibration,itwill

displaythefirmwareversion.Theunitwillthenbereadyforuseandthelastusedpresetwillbeloadedand

indicatedonthedisplay.

Donotpressbuttonsorputobjectsontheunitduringthecalibrationasthiswillincorrectlycalibratethe

capacitnancesensingsystem.Incaseofincorrectcalibrationofthecapacitancesensingsystem,pleasepower

offtheunit,andthenturnitonagaintorepeattheprocess.

Variousnoisesandcalibrationsoundsmightbeaudibleduringthestartupoftheunit,sowerecommendturning

thevolumedownwhilestartingup.