User's Manual

UNO Synth

7 – The Sequencer

Torecordaparameterchange,simplyturntheknobandinsertthedesiredparameterwiththedesiredvalue.

Usethedatabuttonstomovebetweensteps.Thecurrentstepwilllightbelowthekeyboard.

Todeleteastep,pressALT+DOWNtoemptythecurrentstep.Thestepwillblinkandthedisplaywillshowa

“doubleminus.”

ToexitStepRecording,simplypressRECagain.

7.2–Real-TimeRecording

Real-timeRecordingisthemostcommonandeasytousemethod.PressPlayandRectorecordthenotesand

parametersinreal-time.Thistypeofsequencingisthemostsimilarto“live”situationswhereyoujusthitrecord

andrecordon-the-fly.Plus,whileinthismode,alltheparametersmotionswillberecordedintoasmoothtypeof

recordingwhichmeansthatitwillincludeallthesinglevaluesofthemotions.Basicallyeveryparametermotion

youmakeonyourUNOSynthwillberecordedinthismode.

Whilethesequencerisinplaying,italwaysloops.Similarly,therecordingandtheoverdubbingofthenoteswill

alsocontinueuntilRECispressedagain.Exceptwhenrecordingparametersinstead,thesequencerecordsonly