User Manual

English
10
MIDI over Bluetooth mode 1
1. Push and hold the “B” button and then switch ON the device. This way the BlueBoard will start up in MIDI
over Bluetooth mode 1. After this the Status LED will start flashing blue.
2. From the app, follow the procedure to connect to iRig BlueBoard. Once the connection is successful, the
iRig BlueBoard status led will light up steady blue.
These are the specifications for the MIDI over Bluetooth mode 1:
Transmit Channel: 1 / Receive Channel: 1
Transmitting:
Switch A: note C3, velocity 100, momentary action
Switch B: note D3, velocity 100, momentary action
Switch C: note E3, velocity 100, momentary action
Switch D: note F3, velocity 100, momentary action
A “Note ON” message is send when the button is pressed, and a “Note OFF” message is send when the foot-
switch is released.
Exp Pedal 1: CC#12.
Exp Pedal 2: CC#13.
ON
HOLD