User Manual

English
11
Receiving:
Led A: note C3, momentary action
Led B: note D3, momentary action
Led C: note E3, momentary action
Led D: note F3, momentary action
MIDI over Bluetooth mode 2
1. Push and hold the “C” button and then switch ON the device. This way the BlueBoard will start up in MIDI
over Bluetooth mode 2 mode. After having done this the Status LED will start flashing blue.
2. From the app, follow the procedure to connect to iRig BlueBoard. Once the connection is successful, the
iRig BlueBoard status led will light up steady blue.
These are the specifications for the MIDI over Bluetooth mode 2:
Transmit Channel: 1 / Receive Channel: 1
Transmitting:
Switch A: CC#20, momentary operation
Switch B: CC#21, momentary operation
Switch C: CC#22, momentary operation
Switch D: CC#23, momentary operation
Value 127 is sent when the foot switch is pressed, and value 0 is sent when foot switch is released.
ON
HOLD