User Manual

English
12
Exp Pedal 1: CC#12, continuous.
Exp Pedal 2: CC#13, continuous.
Receiving:
Led A: CC#20.
Led B: CC#21.
Led B: CC#22.
Led C: CC#23.
Received values higher or equal than 64 will turn the footswitches LEDs ON, values lower than 64 will turn the
footswitches LEDs OFF.
Startup notes
• If the A, B or C buttons are held during startup, they will illuminate to give confirmation that the button has
been successfully pressed.
• The illumination will stay on for one second after the button has been released. Then it will go off and the
iRig BlueBoard will start up.
• Powering iRig BlueBoard without holding a switch will cause it to boot in the last mode used. The
corresponding button will light up for one second.
Status LED
This LED indicates the working status of iRig BlueBoard:
• OFF: iRig BlueBoard is OFF or the batteries are completely exhausted.
• Continuous flashing: iRig BlueBoard is ON and it is waiting to be paired with the app. (Refer to the specific
app’s user manual).
BLUE
• Continuous ON: iRig BlueBoard is ON and working.