User Manual

English

BLUE

• Mostly OFF with fast ON flashes: iRig BlueBoard batteries are LOW and should be replaced as soon as

possible.

BLUE

Remember to turn OFF iRig BlueBoard every time you finish using it, to save battery life.

Troubleshooting

iRig BlueBoard is not turning ON.

Try replacing the batteries and check that their placement matches the polarity indicators.

iRig BlueBoard is not appearing on the control app.

Turn iRig BlueBoard off and on again by pushing the “A” button, and repeat search on the control app.

iRig BlueBoard is working, but my MIDI app is not receiving commands.

Go to the control app and setup each switch to transmit the message you need — make sure the proper MIDI

channel is set.

I’ve started iRig BlueBoard in BlueBoard mode but I can’t connect it to the control app.

Make sure that you have installed the latest version of the iRig BlueBoard app.

I’m trying to start-up iRig BlueBoard in MIDI over Bluetooth modes but no LED lights up.

Your iRig BlueBoard is not updated with the last firmware version.