User Manual

English
8
Connecting to the Control App
Launch the “iRig BlueBoard” app that you have downloaded.
From the iRig BlueBoard app, follow the procedure to connect to iRig BlueBoard. Once the connection is
successful, the iRig BlueBoard status led will light up steady blue.
Select the device you want to use
from the following list
iRig BlueBoard
In this mode iRig BlueBoard communicates with the control app (iRig BlueBoard) and the Control app converts
the data to standard MIDI messages.
The four iRig BlueBoard foot switches can send MIDI Program Change or Control Change messages. You will
be able to assign each foot switch to the Program Change or Control Change message you want, using the iRig
BlueBoard control app. No setup is needed on iRig BlueBoard hardware.
Note: Please refer to the user manual of the control app for detailed information on this. From the app you’ll also
be able to select which MIDI messages the external pedals will send.