User Manual

2 - Getting started
18
StealthPedal
™
CS
2.7 StealthPedal Power On Check
StealthPedal is a USB Bus-Powered Device, and therefore needs no external
power supply.
StealthPedal has no Power switch, it powers up as soon as it is con-
nected to the computer USB port. The red LED indicator on the side of your
StealthPedal (figure 2.3) will light up during device power up and operating
system boot. The green LED (figure 2.4) will light up when the initialization
will be completed, to indicate that your SteathPedal is ready to use.
figure 2.3 figure 2.4
If StealthPedal does not turn on please check that you have firmly inserted
the included USB cable into both StealthPedal and the computer. Should the
StealthPedal unit still refuse to power up please contact the IK Multimedia
tech support service.
If your computer gives an error about too high current draw from the USB
port you will have to use another port, directly connected to the computer
main board and not, for example, on the USB keyboard.
If the StealthPedal red LED remains ON and does not switch to green, you
need to install its drivers, or reinstall them if you have already done so.