User Manual

3 - Setups and Connections
28
StealthPedal
™
CS
3.2 Using StealthPedal On-stage Direct to The PA System
Outputs
With StealthPedal you can play on-stage without heavy amps and cabinets,
feeding your processed mono or stereo signal directly to the PA system (fig-
ure 3.4). StealthPedal’s balanced outputs are capable of driving long cables
without noise (if the inputs on the receiving side are balanced). Also use
these connections when you are sending your signals to the monitor mixer,
if you are hearing yourself with wedges or with in-ear monitors. The PA
engineers will then split the signals to be sent to the front of house mixer.
You don’t need any D.I. boxes because the StealthPedal balanced outputs are
designed to be connected directly to your mixer or PA system.
figure 3.4