IkaScope WS200 Ultra portable, one channel, 30 MHz, wireless oscilloscope. Product status: Active. 27.MAR.2018 ─ PRODUCT DATA SHEET (PRELIMINARY DATA) IKALOGIC S.A.S.
Ikalogic | IkaScope WS200 data sheet | 1 Table of contents IkaScope WS200 overview 2 Typical applications 2 Product highlights 2 Main characteristics 3 IkaScope WS200 Interfaces 3 Principle of operation 4 How does it work? 4 ProbeClick® technology 4 Connectivity options 4 Unpacking and first usage 4 Turning ON IkaScope 4 First connection 4 AP vs Station connection LEDs behavior 5 5 Battery status LED 5 Wifi Status LED 5 Software quick start guide 5 Measuring your first signa
Ikalogic | IkaScope WS200 data sheet | 2 IkaScope WS200 overview IkaScope WS200 is an ultra portable oscilloscope probe. It weighs less than 60g and is designed to fit perfectly in your hand. With a Wifi connection to a smartphone, a tablet or a computer, signals can be displayed and measurements can be easily made.
Ikalogic | IkaScope WS200 data sheet | 3 General Main characteristics Timing Sampling rate (MAX.) 200 MSPS Rise time (Calculated) 12 ns Input channels Waveform update rate Time base accuracy 253 VAC 1 minute Input to USB isolation2 1100 VAC 1 minute Built-in battery Communication interface 420 mAH Wifi 802.11 b/g/n/e/i 2.4 GHz.
Ikalogic | IkaScope WS200 data sheet | 4 Principle of operation How does it work? IkaScope can be seen as a wireless oscilloscope probe, that displays measured signals and is configured via remote screen (Tablet, smartphone or computer). Technically speaking, IkaScope WS200 integrates a full featured analog front end, a digital processing stage and a wifi module. First, measured signals are conditioned, then converted to digital values via a high speed 8-bits ADC.
Ikalogic | IkaScope WS200 data sheet | 5 When your display device is connected to IkaScope’s wifi network, you may launch IkaScope application and follow further instructions to display measured signals. AP vs Station connection Although IkaScope can be used in AP mode with its full performance, we recommend configuring IkaScope to connect to existing wifi networks. This way, it won’t be necessary to change wifi settings of the display device for each and every usage. established.
Ikalogic | IkaScope WS200 data sheet | 6 When both IkaScope and the application are correctly connected, the connection icon should be green as in the following screenshot. Note: IkaScope device must be turned ON to be connected to a network. If all LEDs are switched OFF, please turn ON IkaScope by pressing on the probe tip for 1 second. Finally, press IkaScope probe tip on the pad where an electric signal needs to be measured.
Ikalogic | IkaScope WS200 data sheet | 7 What’s in the box IkaScope WS200 is shipped with the following accessories: ● ● ● ● Ground connection probe. Protective cap. USB charging cable. Quick start guide. Software technical requirements Download the IkaScope app on www.ikalogic.com so you can use your device on your favorite platform. Technical requirements: Desktop ● Windows 7/8/10 with OpenGL 2.0 or later (OpenGL ES excluded) ● Mac OS 10.9 with OpenGL 2.
Ikalogic | IkaScope WS200 data sheet | 8 Document Revisions ● ● ● 04-December-2017: Initial release of this datasheet. 26-February-2018: Added software technical requirements section 27-March-2018: Corrected time base accuracy This information is subject to change without notice. © Ikalogic SAS 2018, www.ikalogic.
