User guide

- 10 -
The icon bar contains a number of action buttons (Windows standard symbols) for direct selection of
the following functions:
 Start or stopp measurement,
 Configure interface card ,
 Create, open or store configuration file ,
 Define ramp function ,
 Enter file information ,
 Print signal flow chart,
 Display info on
ODEZRUOG
VRIW.
1RWH

The functions can also be set with the menu bar .
 The icon bar can be displayed and concealed by clicking on )XQFWLRQEDU in the "View"
pulldown menu (marked with check mark).
7RDFWLYDWHDIXQFWLRQGLUHFWO\
x Click on the corresponding action button in the icon bar with the mouse.

7RROEDU
The tool bar contains action buttons for directly selecting the elementary functional units required for
the current application. All available functional units are represented with icons and combined in
groups color coded according to their assignment. This enables faster access to all functional units:
Blue: Functional units of the physically present laboratory instruments
(hardware)
Yellow Functional units for averaging and for arithmetic operations
Red: Functional units for manual or automatic control of the instruments or for
loading a control file
Green: Functional units for displaying results : numerical or graphical displays
and automatic saving of results
1RWH
The functional units can also be activated in the "Module" pulldown menu .
7RGLUHFWO\VHOHFWDIXQFWLRQDOXQL W 
x Click on the corresponding action button of the tool bar with the mouse.
