Owner's manual

RH b2dKT

For materials which are not listed, please request information from

IKA. Wear the proper protective gloves during cleaning of the devi-

ces. Electrical devices may not be placed in the cleansing agent for

the purpose of cleaning.

Before using another than the recommended method for cleaning

or decontamination, the user must ascertain with the manufactu-

rer that this method does not destroy the instrument.

Version RH basic KT/C

and RH digital KT/C

Information for Care and Maintenance of the HeatingPlate with

Technical Enamel Coating

The technical enamel makes the heating plate easier to care fort

and more resistant to acids and bases. Because of it, however,

theheating plate is also more susceptible to extreme fluctuations

in temperature and the force of impact. This can result in cracks

forming or the coating flaking off.

Make certain that the bottom of the placing vessel is even, clean

and dry. The bottom of the placing vessel must not have any sharp

grooves, sides or edges. Remove residues of bases and immedi-

alety. We recommend most strongly that you clean the heating

plate regularly.

RS 1 set of stirring bars H16V support rod

H 15 bath top

RSE PTFE stirring bar remover

Vers. KT

H 36 holding rod

ETC 1 IKATRON

H 44 cross sleeve

ETS-D IKATRON

Recommended IKA-stirres

TRIKA-stirrer PTFE, triangular, length 55mm

IKAFLON-stirrers PTFE

dia 8mm lengths 25, 30, 40 and 50 mm

Accessories