User Manual

Recommendations

• After adjusting the camera installation, check that each knob is fully tightened.

• Do not overtighten the screw wrench to avoid stripping the screw.

• For very small cameras and lenses, if you cannot reach the balance as per the steps above, replace

the camera or lens.

TIP

• Before starting the gimbal, make sure the camera is properly mounted on the stabilizer and perfectly

balanced.

• The Ikan Beholder DS2-A uses the latest 32-bit systems, a multi-processor technology and inductive

motor technology, with greatly improved torque. Therefore, it's able to start and level the camera if

it is out of balance, but for shot stability, battery life and power saving, we strongly recommend you

find the best balance first and then power the gimbal on and shoot the video.