User Manual

Boot interface with company logo

profile1: Press mode button once: Lock mode

profile2: Press mode button twice: Pan Follow mode

profile3: Press mode button three times: Follow mode

profile4: Press mode button four times: 3-Axis Follow mode

profile5: Press mode button five times: 60 Second Auto Sweep

1. Position camera at end point.

2. Press the mode button five times.

3. Within 10 seconds, position the camera at the start point.

4. After 10 seconds, the camera will automatically move to the chosen end point

within 60 seconds.

Note:

Press and hold the mode button for 6 seconds to start gyro calibration. Do not move the

gimbal while calibration is in process. In case the gimbal is moved, please start the

calibration over. Usually the calibration takes about 5 seconds. During this time, the gimbal

will shut off and restart the motors.

OLED Display ▲