User Manual

16
2017 Beholder ® All Right Reserved
Things to consider before use
The Ikan Beholder DS2-A is shipped from the factory with perfect calibration. However, after a long period of unuse
or if the temperature difference is too large, it may cause the gyroscope to drift automatically or to tilt during use.
Gyro Correction:
Place the Ikan Beholder DS2-A horizontally on the table, power on the gimbal and press and hold the menu button for 6
seconds. The system automatically enters the gyroscope calibration mode. The motors lose power for 5 seconds. After
that, the automatic system calibration is complete and the stabilizer can resume normal use.
Note:
1. During the calibration process, hold the gimbal handle on the table as stable as possible.
2. The mini USB port is designed only for a wired joystick and can't be used for charging.
3. In order to obtain a better shooting experience when using the DS2-A, avoid any collision and do not use
excessive force.
Important safety instructions
1. Do not get too close to a magnetic field or a source of extreme heat and fire.
2. Using and storing this product under high temperature and humidity, water, or a highly corrosive environment
can cause the device internal damage.
3. Protect the power cord to avoid trampling or backlog, particularly at plugs, sockets and other parts.
4. Do not use an incompatible power supply, charger or batteries that may cause a fire, explosion or other hazard.
Use only manufacturer-approved equipment and matching accessories to meet safety standards. Other types of
accessories may cause problems with the product or a security incident.
5. When not using this product for long periods of time, please remove the battery, wrap it in dust-proof
packaging and place it in a dry environment.
6. Do not use the device during a thunderstorm or it may result in equipment malfunction or put you at risk of a
lightning strike.
7. Do not expose the battery to excessive heat in the environment, such as sunlight, fire or similar factors.
8. Do not expose this appliance to dripping or splashing liquids.
9. Do not place conductive objects at the battery holder electrical terminal, or contact the battery ends, in order
to not cause the battery to short-circuit or cause burns and other physical injuries due to the battery
overheating.
10. Do not expose the battery near any heat sources such as sunlight, heaters, microwave, oven, stove, radiator, or
other instruments that produce heat (including amplifiers).
11. If the battery is used improperly, there may be an explosion hazard. In order to reduce the risk of fire or burns,
do not disassemble, crush, puncture, short external connections, expose to heat or throw in fire.
12. If the batteries leak, do not allow the liquid to contact the skin or eyes. If your skin or eyes come in contact with
the battery liquid, wash with water immediately and go to the hospital for medical treatment.
13. If battery discoloration, deformation, abnormal heat and other phenomena occurs, please stop using and
replace the battery.
14. This product may contain small equipment and parts. Keep the device and its accessories out of reach of
children. Children may damage the device or swallow small parts - beware of choking.
15. Dispose of used batteries in accordance with local regulations.
Precautions ▲
Safety ▲