User Manual

The Beholder DS2-A is designed specifically for professional filmmakers looking for a single handheld stabilizer for a

large range of small cameras weighing up to 4 lbs.

The DS2-A features a unique angled roll motor arm, which allows you to have a better view of the camera’s screen

while using the gimbal. In addition, the DS2-A also features a 60 second Auto-Sweep mode, which allows you to

program a 60 second camera movement.

The Beholder DS2-A is lightweight, easy to use, and can be carried in your camera bag. It is also versatile enough to

be used with a DSLR, mirrorless camera, GoPro, or smartphone.

Angled Motor Arm: The DS2-A is the first Ikan Beholder gimbal to feature an angled motor arm that gives you an

unobstructed view of the camera’s screen. This makes it easier to frame your shots and follow the action.

360 Motor: The DS2-A features a 360 degree rotation brushless motor on the yaw axis for a higher range of mobility.

Designed for Multiple Cameras With a payload of up to 4 lbs., the DS2-A has the ability to stabilize a wide range of

today’s popular DSLR and mirrorless cameras including the: Canon 5D Mark IV, Canon 6D, Canon 7D, Sony a6300, Sony

a7SII, Panasonic GH5, GoPro, or smartphone.

Advanced Stabilization: Using a 32-bit controller with a 12-bit encoder, the DS2-A uses an adaptive PID algorithm to

produce an efficient handheld stabilizer. This means that the gimbal will respond faster, balance easier, and have

greater battery life.

Lock Mode: In Lock Mode, the yaw, pitch, and roll axis work together to keep the camera pointed in one direction.

The camera’s composition will stay the same no matter how you move the handle.

Auto Inversion: Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can

be operated in conjunction with any of the Lock and Follow Modes.

Multiple Follow Modes: The DS2-A features 3 different follow modes. In Yaw- Axis Follow Mode, the DS2-A will only

follow your pan movements. In Pitch and Yaw-Axis Follow mode, the DS2-A will follow your pan and tilt movements.

Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt, and roll.

60 Second Auto-Sweep: The DS2-A features a 60 Second Auto-Sweep function, which allows you to program a 60

second movement. Position the camera at the end point, and then press the mode button 5 times. Then, position the

camera at the start point and let the DS2-A do the rest! The camera will move from one point to the other in a 60

second time frame.

About the DS2-A ▲

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

WARNING