Quick start Guide

Shortcut Function

The Strobe Mode Screen

Adjustable Knob

In the picture above, there are buttons A,B,M & E on the left. In the middle of the picture

is the LCD Screen. On the right of the picture is the adjustment knob. During standard

operation, the four buttons are featured by shortcut functions with the following details:

1. Button B Turn Light ON/OFF

2. Button E: Turn Strobe Mode, and Light dual color ON/OFF. To change the parameter

of the strobe mode, go to the menu setting. Strobe mode is shown as follows:

Change the strobe frequency through the adjustable knob, as below:

Default screen - Dual Color - Strobe - Dual Color - Button 3 - Default Screen

1. Button A: Turn ON/OFF Color temperature. Change current parameters through the

adjusting knob. Pressing the button for more than 3 seconds will lock the adjusting

knob to prevent unintentional operation. Pressing it again will unlock.

2. Button M: Press to go to Menu setting mode.

The knob is used to adjust the dual-color LED Light’s illumination & color temperature

in normal operation. Adjustment range of illumination is 0-100%, and adjustment range

of color temperature is 2700K-5600K. In the strobe mode, it is used to adjust the ﬂash

rate, which is in the adjustment range of 1-50Hz. In the menu setting status, the knob

is used for parameter settings. For speciﬁc adjustment parameters, see the following

menu setting operation.

13.8V

Freq

STROBE

1 50Hz