Quick start Guide

Troubleshooting
Failure
Unit Won’t Turn On
During the operation
lamp is out.
Troubleshooting
The power is connected
incorrectly, press the
power switch on.
Turn on the light with
the button B.
Turn off the power and
restart lamp again when
temperature is lower.
Contact Ikan for
repairing or replacing
the new diodes.
Contact Ikan for
repairing or replacing
the fan.
Failure Cause
The power is connected incorrectly or
the power switch in not turned on.
Turn off Light with shortcut button.
Overheat protection was initiated by
long time or environment temperature.
Diodes or circuit damage.
Overheat protection was initiated by
fan failure.
Notice & Maintenance
1. The HF40 Spotlight working temperature range must be regulated. Overheating and
under-cooling will reduce the LED working life.
2. Products must be placed on a stable, dry, flat surface. Avoid exposure to sunlight
and operating in an environment with high humidity or explosive gas.
3. Don’t cover the fan vent. It will shorten the working life of the fixture.
4. Don’t beat, knock or shake the lighting equipment during the operation.
5. If the HF40 isn’t working normally, please contact the Ikan repair department. Please
don’t disassemble/re-assemble by yourself.
6. Please place the HF40 in a cool and dry place when you don’t use it for an extended
period of time.
Advanced Features
Bi-Color Light adjustable from 2700K-5600K
4” Fresnel with flood to spot
High CRI and TLCI
Can be powered by Pro V-Mount Battery
Flicker feature allows slow to fast strobe
Large digital readout for easy adjustment