User Guide

ManualsBrandsikan ManualsOtherikan High Bright Beam Splitter Teleprompter

Table Of Contents

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re ﬁlmmakers too

PT4500-SDI / PT4700-SDI

Quick Start Guide

High Bright Beam Splitter Teleprompter w/ 3G-SDI, HDMI, & VGA

What’s Included

1 x Teleprompter Base

1 x Bracket with Glass

1 x Teleprompter Hood with Boot

1 x Monitor

1 x AC Adapter with Cord

1 x PrompterPro Software

1 x Counterweight Set (2 x 2.5 lbs)

2 x D-Ring ¼-20” Screws

2 x Hex Keys

3 x Different Height Risers

Summary of content (7 pages)

PAGE 1
Quick Start Guide PT4500-SDI / PT4700-SDI High Bright Beam Splitter Teleprompter w/ 3G-SDI, HDMI, & VGA What’s Included 1 x Teleprompter Base 1 x Bracket with Glass 1 x Teleprompter Hood with Boot 1 x Monitor 1 x AC Adapter with Cord 1 x PrompterPro Software 1 x Counterweight Set (2 x 2.5 lbs) 2 x D-Ring ¼-20” Screws 2 x Hex Keys 3 x Different Height Risers www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.
PAGE 2
Assembly Steps Step 1 Remove the monitor mounts from the teleprompter base using the included larger 4mm hex key to loosen from the 15mm rods. Step 2 Attach the monitor mounts on the back of the monitor’s VESA compatible threads using the 4 included screws and provided 2mm hex key. 1224V HD VG MI A www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.
PAGE 3
Step 3 After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket. Make sure the 15mm rods go through both set of monitor mounts. Please ensure that all screws are properly tightened after inserting the monitor. *SAFETY NOTE* Make sure to leave at least 2 inches of the rods inside the teleprompter base.
PAGE 4
Step 5 Once the bracket is in place, tighten the side screw to lock in place. Double check and make sure all the screws are tightened with the included hex keys. Step 6 (optional) Should the teleprompter be too front heavy, you can attach the included counter weight on the back of the teleprompter base. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.
PAGE 5
Monitor Ports Monitor Menu Settings MI HD 3G-SDI – Serial Digital Interface Connection VGA – Video Graphics Array DE15 Connection HDMI – High-Definition Multimedia Interface Input Connection Power Port – 12-24v Input Video Config Contrast (White Level) Brightness (Black Level) Tint (Chroma Hue) Chroma (Chroma Saturation) Sharpness (Detail) RGB Setup – Manually configure RGB Return System Config Menu Duration – Set duration of how long menu stays on screen Video Ratio – Set screen aspect ratio 16:9 or 4:
PAGE 6
Specifications PT4500-SDI PT4700-SDI Aspect Ratio 4:3 Aspect Ratio 4:3 Backlight LED Backlight LED Brightness 1000 nits Brightness 1000 nits Build Material Aluminum Build Material Aluminum Diagonal 15” Diagonal 17” Input Signal 3G-SDI, VGA, HDMI Input Signal 3G-SDI, VGA, HDMI Input Voltage DC 12v / 4A Input Voltage DC 12v / 4A Power Consumption 10W Power Consumption 10W Reading Range 17’ Reading Range 20’ Resolution 1280 x 1024 Resolution 1280 x 1024 Viewing Angle
PAGE 7
Learn More More dynamic information at official website: www.ikancorp.com Support Contact email: support@ikancorp.com CONDITIONS OF WARRANTY SERVICE • • Free service for one year from the day of purchase if the problem is caused by manufacturing errors. The components and maintenance service fee will be charged if the warranty period is expired. Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.