Quick start Guide

Tally Lights
HDMI Terminal
IN: HDMI signal input terminal
OUT: HDMI signal output terminal
SG-SDI (HD/SD) Terminal (BNC)
IN: SDI input terminal - 3G
OUT: 3G-SDI signal output terminal
VIDEO Terminal (BNC)
IN: Composite Signal Input Terminal
OUT: Input Signal Through-out Terminal
YPbPr Terminal (BNC)
IN: Component Signal Input Terminal
OUT: Input Signal Through-out Terminal
Mini USB Connector
Factory Use Only.
Battery Plate Slot
Mount ikan BP-2 Style battery plate
2-Pin Power Input
For use with Pro battery plate adapter.
Vesa 100mm Mount Holes
Threaded for M4x.07 Screws. Use to attach Pro Battery
Plate Adapter, or for mounting third-party Vesa mounts.
For Future Use
3.5mm Audio Input & Output Terminal
Tally Connector
USB for Firmware Upgrades
COAX Power Input
For use with included Power Supply.
4-Pin Mini XLR Power Input
Hard Power Switch
1
7
8
9
10
12
14
11
13
15
16
2
3
4
5
6
1
2
3
4
5
6 8 9 10
11
7
12
13
15
14
16
Powering the Monitor
Plug the AC Adapter into the power input jack.
Attach the DV Battery Plate on the slot, and connect DV battery to the plate.
Connect a Pro Battery using the optional Pro Battery plate and then plugging that plate with the power tap cable into the DC-In connector.
The pro battery plate kits (PBK17-S or PBK17-A) allow you to go into the field using standard V-Mount or Gold-Mount batteries.