Users Manual

23
2. Hold the remote control close to
the light source you want to add (no
more than 5 cm away).
3. Press and hold the pairing button
for at least 10 seconds. A red light will
shine steadily on the remote control.
Your light source will begin to dim
and ash one time to indicate that it
has been successfully paired.
Up to 10 light sources can be paired
with 1 remote control. Make sure to pair
them one at a time. If the light sources
are close to each other, disconnect
those that have already been paired
from the main power switch.
FACTORY RESET YOUR DEVICES
For light sources:
Toggle the main switch 6 times.
For remote control:
Press the pairing button 4 times
within 5 seconds.
SYNCHRONIZING
If your light source becomes
unsynchronized, press and hold the