User's Manual

Document name: ICC-1 connectivity module Revision: 0.7

FCC ID: FHO-ICC-1 Revision date: 2016-07-05

IC ID: 10912A-ICC1

2.3 Grounding of metal heat sink

When using opening A in the solder mask of the Poly PCB as shown in Figure 7, the

antenna connection shall be as short and close to antenna feed as possible.

Figure 7 - Suggested grounding point

If integrated in LED bulbs, when inserted into an opening the module PCB shall be

grounded to the heatsink plate as shown in Figure 8.

Figure 8 - Grounding point for heatsink

Grounding point for heatsink