User's Manual

Document name: ICC-1 connectivity module Revision: 0.7
FCC ID: FHO-ICC-1 Revision date: 2016-07-05
IC ID: 10912A-ICC1
© Inter IKEA Systems B.V. 2016 Page 14 of 17
4.4 Transceiver characteristics
Parameter Condition Min Typ Max Unit
Maximum TX power, 802.15.4
DSSS-QPSK
Conducted, 3.3V 14 dBm
RX Sensitivity 1% PER Conducted, 20 octets -99 dBm
FOFF Input frequency offset
tolerance 1% PER
-120 120 ppm
Co-channel interferer rejection
1% PER
Received signal 10dB
above sensitivity level
-3 dB
Adjacent channel rejection
5MHz
Interferer +-1 channel
spacing
55 dB
Adjacent channel rejection
10MHz
Interferer +-2 channel
spacing
58 dB
4.5 Wake up timing
Parameter Condition Min Typ Max Unit
From EM2 deep sleep Executing RAM
or cache
2.8 3.4 uS
From EM2 deep sleep Executing from
flash
7.8 10.4 uS
4.6 General purpose input/output
Parameter Condition Min Typ Max Unit
VIOIL Input low voltage VDD*0.3 V
VIOIH Input high voltage VDDIO*0.7 V
VIOOL Output low voltage relative to
VDD
VDD*0.4 V
VIOOH Output high voltage relative
to VDD
VDDIO*0.6 V
IIOLEAK Input leakage current 0.1 nA
RPU I/O pin pull-up resistor 30 40 50 kOhm
RPD I/O pin pull-down resistor 30 40 50 kOhm