User's Manual

Document name: ICC-1 connectivity module Revision: 0.7

FCC ID: FHO-ICC-1 Revision date: 2016-07-05

IC ID: 10912A-ICC1

5 Regulatory instructions

5.1 Limitations

ICC-1 shall only be installed in limb-worn devices and only be used as described in this

document and cannot be co-located with other antennas or transmitters, exceptionally if

specified in the grant condition of the equipment authorization. Other electronic

functions not associated with the certified module or certified transmitter requires

additional equipment authorization.

A host product itself is required to comply with all other applicable FCC equipment

authorization regulations, requirements, and equipment functions that are not associated

with the transmitter module portion. To ensure compliance for all non-transmitter

functions, a host product manufacturer is responsible for ensuring compliance with the

module(s) installed and fully operational.

ICC-1 fulfils the RF exposure requirements as portable limb-worn device and as mobile

device, with a separation distance equal to or more than 20 cm between product and

users body in normal operation.

ICC-1 must only be installed in portable limb-worn devices (not body worn) or in mobile

devices with a separation distance equal to or more than 20 cm from users body under

normal operations.

If ICC-1 is installed in a mobile device (host), a special text needs to be added in the

host user manual. This text needs to include information regarding the separation

distance and advise the end user that it is not allowed to be closer than 20 cm from the

device during normal operation. The text needs to be in both English and French

language.

5.2 User manual

User manual for license-exempt radio using the ICC-1 module needs to contain ICC-1

regulatory information.

5.3 Label

The label for license-exempt radio using the ICC-1 module shall be printed separately

and needs to contain the FCC ID/ISED certification number clearly visible on the product.