User's Manual

Document name: ICC-A-1 connectivity module description Revision: 0.1

Document ID: SCDOC-129-680 Revision date: 2017-04-24

FCC ID: FHO-ICC-A-1

IC ID: 10912A-ICCA1

1.3 Radio front-end and crystal

The ICC-A-1 radio chipset has a built-in balun. The radio output is connected to an

antenna using a wave guide type of trace to minimize losses because of the two-layer

structure of the PCB. The front-end has a discrete RF-filter to comply with harmonic

emission regulations. The radio uses an XO with integrated frequency control via built-in

thermistor to cover the wide temperature range.

If a stable slow clock source is needed, oscillators can be calibrated in runtime instead of

using a dedicated 32 kHz clock.

1.4 Type approval markings

The ICC-A-1 module has a FCC ID and Industry Canada (IC) number silkscreen printing

for reference located at the bottom. The host shall be labelled with Contains Transmitter

Module FCC ID: XXX and IC: XXX

• ICC-A-1

• FCC ID: FHO-ICC-A-1

• IC:10912-ICCA1

Figure 3 - Silkscreen printing