User's Manual

WIRELESS DIMMER FUNCTIONS
ON/OFF: Rotate fast for 100% Brightness
and OFF.
Dim up/down: Rotate slowly for dimming
up/down.
Pairing: Add IKEA Smart Lighting
products to your system. See
instructions below.
ADDING DEVICES TO YOUR
WIRELESS DIMMER
When the wireless dimmer is sold together
with a light source (in the same package),
they are already paired.
To add light sources, just repeat the steps
below.
1 Make sure that your light source is
installed and the main power switch is
turned on.
2 Hold the wireless dimmer close to the
light source you want to add (no more
than 5 cm away).
3 Press and hold the pairing button
for at least 10 seconds, you can nd
the pairing button under the top cover.
A red light will shine steadily on the
wireless dimmer. Your light source
will begin to dim and ash one time to
indicate that it has been successfully
paired.
Up to 10 light sources can be paired with 1
wireless dimmer.
Make sure to pair them one at a time. If
the light sources are close to each other,
disconnect those that have already been
paired from the main power switch.
REMOVING DEVICES FROM
YOUR WIRELESS DIMMER
1 Make sure the main power switch is
turned on for the light source you want
to un-pair from your TRÅDFRI wireless
dimmer.
ENGLISH 4