User Manual

Problem Possible cause Remedy
The display shows an error
code that is not in this table.
There is an electrical fault.
• Turn o the oven with the
house fuse or the safety
switch in the fuse box and
turn it on again.
• If the display shows the
error code again, contact
an Authorised Service
Centre.
Steam and condensation set‐
tle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
The lamp is turned o. The Moist Fan Baking func‐
tion is turned on.
Normal behavior of the Moist
Fan Baking function. Refer to
"Daily Use" chapter, Heating
Functions.
The door is locked. There was a power cut. Check the power supply.
Service data
If you cannot nd a solution to the problem
yourself, contact an Authorised Service
Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not
remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Technical data
Technical data
Dimensions (internal)
Width
Height
Depth
480 mm
361 mm
416 mm
Area of baking tray 1438 cm²
Top heating element 2300 W
Bottom heating element 1000 W
ENGLISH 33