User Manual

6 ENGLISH 6
Product description
Control panel
Functions
Boost
Each cooking area can be set to an extra power level for 5 minutes
at most.
To activate: select one of the 4 cooking areas and select the value
“Boost” on the scroll keypad. The corresponding digit displays .
To deactivate: select one of the other possible values on the scroll
keypad.
Child lock
This function prevents an accidental operation of the appliance.
To activate: simultaneously press and , release and the press
again. All the digits display . The operations described must be
completed within 10 seconds.
To deactivate: simultaneously press and , release and the press
again. All the digits displaying go out. The operations described
must be completed within 10 seconds.
Lock
It is possible to lock the hob functions during use to avoid

To activate: press .
To deactivate: press .
Cooking areas Timer
Timer with alarm for cooking times.
To activate: turn the hob on and select one of the 4 cooking areas,
press “+” and “-” to set the Timer. The symbol for the cooking
area lights up.
Press individually on “+” and “-” to set the countdown. The Time
increase and decrease during set-up varies according to the time
to be set. The Displays in the Timer management commands area
shows the countdown.

Using the timer selection key again, if no value was set, the next active
cooking zone can be selected.
Once the timer are selected, press “+” and “-“ to display the countdown.
The symbol lights up and indicate the cooking area timer. Press again
“+” and “-“ to display the other cooking areas timer.
To disable: wait until the end of the countdown or set the Timer
values to zero (press “+” and “-” and set zero with “-”).
Timer (generic)
Timer with alarm for generic use.
To activate: turn the hob on, press “+” and “-” to set the Timer.
Press individually on “+” and “-” to set the countdown. The Time
increase and decrease during set-up varies according to the time
Pot detection
Each of the cooking areas is equipped with a system to detect the presence of
a pan.
The pan presence detection system recognises pans with a magnetisable base
suitable for use with induction hobs.
If the pan is removed during operation, or if an unsuitable pan is used, the
display shows the symbol .
Residual heat indicator
The residual heat indicator is a safety feature, indicating that the surface
of the cooking area is still at a temperature of 50° C or above, which may
cause burns if touched by a naked hand. The digit for the corresponding
cooking area displays .
Single cooking area (210 x 190 mm) 2100W, with Booster 3000W.
Single cooking area (210 x 190 mm) 2100W, with Booster 3000W.
Single cooking area (200 mm) 2300W, with Booster 3000W.
Single cooking area (160 mm) 1400W, with Booster 2100W.
Control panel
+ Bridge cooking area (210 x 380 mm) 3000W, with Booster 3700W.

Pause function button
Timer control and cooking time indicator
Bridge led
Timer led
Power level indicator
Melting function led
Melting function button
Scroll keypad
Lock function button