User Manual
7
ENGLISH
7
to be set. The Displays in the Timer management commands area
shows the countdown.
To disable: wait until the end of the countdown or set the Timer
values to zero (press “+” and “-” and set zero with “-”.
Automatic Function (hobs)
Select one of the 4 cooking areas and press and hold for 3
seconds on the selected value (from 1 to 8) on the scroll keypad.
The Hob will have a peak of up to maximum power for a time
that varies according to the previously set cooking power and then
remains at the value set at the beginning (from 1 to 8).
Power Time at maximum Power
1 40 seconds
2 72 seconds
3 120 seconds
4 176 seconds
5 256 seconds
6 432 seconds
7 120 seconds
8 192 seconds
9 not available
Booster not available
Pause Function
This function freezes all the hob settings if the person using the
hob needs to go away for a time.
During the pause, all digits display to indicate that:
- No energy is being produced in any of the cooking areas.
- All function and timer are disabled
To activate: with the hob working, press and hold
for at least 1
second.
To deactivate: press and hold
for at least 1 second and slide your
shows an animation.
Recall Function
This function is used to recall all the hob function settings in the
event of involuntary shut-down using
.
within 6 seconds, and press
within 6 seconds. A beep sounds to
seconds the previous function settings will be lost.
Melting function
To activate: select one of the 4 cooking areas and press .
The digit for the selected area will show
To deactivate: press or press
.
Bridge Function
This function allows 2 cooking areas to be connected, so that they
can be controlled as a single, large cooking area. This means it is
possible to use larger pans.
This function can only be used with the left hand cooking areas.
To activate: simultaneously press both left scroll keypads until a
digit displays and the symbol
will light up.
To set the power of the bridge zone use the furthest left scroll
keypad.
In both the cooking areas, the symbol
will light up.
To deactivate: simultaneously press the buttons that have been
used to activate the bridge, until the symbols and
disappears.
Important! The hob automatically recognises a larger pan
occupying two cooking areas, but it will treat the areas
independently unless the bridge function is activated.
Hob technical data
Unit Value
Type of product Built-in Hob
Dimensions
Width mm 780
Depth mm 520
Min./max height mm 54
Total power W 7400
Parameter Value
Power supply voltage/frequency
220-240 V, 50 Hz;
220 V, 60 Hzw
2N~ 380-415 V, 50 Hz;
2N~ 380 V, 60 Hz;
Weight of the appliance 10,4 Kg
Energy efficiency of hob
ROGESTAD
Number of cooking areas 4
Number of Bridge cooking areas 1 - Left
Cooking technology Induction
Dimension of Bridge cooking area Left 210 x 380 mm
Dimension of cooking area
Left front 210 x 190 mm
Left rear 210 x 190 mm
Right rear Ø 200 mm
Right front Ø 160 mm
Energy consumption per Bridge
cooking area
192 Wh/kg
Energy consumption per cooking area
Right rear 185 Wh/kg
Right front 187 Wh/kg
Energy consumption of the hob
(electric cooking)
188 Wh/kg