RENLIG DW60 GB
ENGLISH 4
ENGLISH 4 Contents Safety information Product description Control panel Washing programmes Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent 4 6 7 9 10 10 11 12 12 14 Setting and starting a washing programme Care and cleaning What to do if… Technical data Installation Water connection Electrical connection Environment concerns IKEA GUARANTEE 15 16 17 19 19 20 21 21 21 Subject to change without notice Safety information
ENGLISH Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
ENGLISH 6 Product description 1 2 9 3 8 4 5 7 6 1 2 3 4 5 Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser 6 7 8 9 Rating plate Filters Lower spray arm Upper spray arm
ENGLISH 7 Control panel 5 1 2 A 1 2 3 4 5 4 3 B On/off button Half-load button Programme selection/cancel button (SELECT/CANCEL) Indicator lights Programme indicator lights Indicator lights The indicator light comes on when the washing programme is completed. Auxiliary functions: • Level of the water softener. • Activation/deactivation the audible signals. • An alarm if the appliance has a malfunction. 1) 1) The indicator light comes on when it is necessary to fill the rinse aid.
ENGLISH Programme selection/cancel button Use the programme selection/cancel button for these operations: • To set the washing programme. Refer to the chapter 'Setting and starting a washing programme'. • To set the water softener. Refer to the chapter 'Setting the water softener'. • To deactivate/activate the audible signals. Refer to the section 'Audible signals'. • To cancel a washing programme in progress. Refer to the chapter 'Setting and starting a washing programme'.
ENGLISH 9 Washing programmes Washing programmes Programme Intensive Normal 1) Quick Eco 2) Hold Rinse & Degree of Type of load soil Programme description Half-load option Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying yes Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 65°C 2 intermediate rinses Final rinse Drying yes Normal soil Crockery, cutlery, pots and pans Normal or light soil Crockery and cutlery Main wash up to 60°C Final rinse no N
ENGLISH 10 Programme Programme duration Energy consumption Water consumption (minutes) (kWh) (litres) 12 0,1 5 1) The duration of this washing programme is prefixed (longer) than the others due to a prolonged drying and washing phases. The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to the following instructions for each step of procedure: 1.
ENGLISH 11 Water hardness Water hardness setting °dH °TH mmol/l Clarke manually electronically 4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2 <4 <7 < 0,7 <5 11) 11) 1) No use of salt required. You must set the water softener manually and electronically. Manual adjustment The appliance is set at the factory at position 2. 1 2 Set switch to position 1 or 2. Electronic adjustment The water softener is set at the factory at level 5. 1. Switch on the appliance. 2.
ENGLISH 12 3 4 5 6 Fill the salt container with 1 litre of water (only the first operation). Fill the salt container with 1,5-2,0 kg of salt. Use the salt funnel supplied. Make sure that there is no grain of salt outer of the salt compartment. It is normal that water overflows from the salt container when you fill it with salt. Use of rinse aid Caution! Only use branded rinse aid for dishwashers.
ENGLISH Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.). • Before you load cutlery and dishes, do these steps: – Remove all food remainings and debris. – Make burnt, remaining food in pans soft. • While you load cutlery and dishes, do these steps: – Load hollow items (e.g. cups, glasses and pans) with the opening down. – Make sure that water does not collect in the container or in a deep base.
ENGLISH 14 A A Do these steps to move the upper basket to the upper or lower position: 1. Move the front runner stops (A) out. 2. Pull the basket out. 3. Put the basket in the upper or lower position. 4. Replace the front runner stops (A) in their initial position. Caution! If the basket is in the upper position, do not put cups on the cup racks. Use of detergent Only use detergents (powder, liquid or tablet) that are applicable for dishwash- 4 3 ers.
ENGLISH 15 1. Make sure that the detergent tablets are applicable for your water hardness. Refer to the instructions from the manufacturer. 2. Set the lowest levels of water hardness and rinse aid dosage. 2. Set the water softener to the highest level. 3. Do a washing programme without dishes. 4. Adjust the water softener. Refer to the chapter 'Setting the water softener'. 5. Adjust the rinse aid dosage. It is not necessary to fill the salt container and the rinse aid dispenser.
ENGLISH 16 3. For better drying results, keep the door ajar for some minutes before you remove the dishes. Let the dishes cool down before you remove them from the appliance. Hot dishes are easily damaged. • There can be water on the sides and door of the appliance. Stainless steel becomes cool more quickly than the dishes. Removing the load • First remove items from the lower basket, then from the upper basket. Care and cleaning Warning! Switch the appliance off before you clean the filters.
ENGLISH 17 Frost precautions Caution! Do not install the appliance where the temperature is below 0 °C. The manufacturer is not responsible for damage because of frost. If not possible, empty the appliance and close the door. Disconnect the water inlet hose and remove water from the water inlet hose. What to do if… The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problem yourself.
ENGLISH Problem 18 Possible cause Solution • Continuous flash Close the water tap and Contact your local After Sales Service. of the light of the running programme. • Intermittent audible signal. • 3 flashes of the end indicator light. Malfunction: The anti-flood device operates. Malfunction: The appliance door is not closed. Close the door. The programme Mains plug is not connected in. Put in the mains. does not start. The fuse has blown out in the Replace the fuse. household fuse box.
ENGLISH 19 Problem Possible cause There are streaks, milky spots or a bluish coating on glasses and dishes Solution Wrong dosage of rinse aid. Decrease the rinse aid dosage. Dry water drop Wrong dosage of rinse aid. signs on The detergent can be the cause. glasses and dishes Increase rinse aid dosage. Use different type of detergent.
ENGLISH If a repair is necessary, the appliance must be easily accessible for the engineer. Put the appliance adjacent to a water tap and a drain. 20 For the venting of the dishwasher only water fill, water drain and power supply cable openings are necessary. Water connection This appliance has a special inlet hose for water stop later defined as aqualock. Water inlet hose Connected the appliance to a hot (max. 60°) or cold water supply.
ENGLISH 21 Electrical connection Warning! The manufacturer is not responsible if you do not follow these safety precautions. Ground the appliance according to safety precautions. Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply. Always use a correctly installed shockproof socket. Do not use multi-way plugs, connectors and extension cables. There is a risk of fire. Do not replace the mains cable yourself.
ENGLISH quired as proof of purchase. If service work is carried out under guarantee, this will not extend the guarantee period for the appliance, Which appliances are not covered by the IKEA five (5) years guarantee? The range of appliances named LAGAN and all appliances purchased in IKEA before 1st of August 2007. Who will execute the service? IKEA service provider will provide the service through its own service operations or authorized service partner network.
ENGLISH • the technical specifications of the country in which the guarantee claim is made; • the Assembly Instructions and User Manual Safety Information; The dedicated SERVICE for IKEA appliances Please do not hesitate to contact IKEA appointed SERVICE to: • make a service request under this guarantee; • ask for clarification on installation of the IKEA appliance in the dedicated IKEA kitchen furniture.
France 0170 36 02 05 Germany 01803-334532 (0,09€/Min.
156988030-00-012009 © Inter IKEA Systems B.V.
