User manual

Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and remove
the residues with water and washing up liquid
after each use. Remove also the remnants of
the cleaning agents!
Scratches or dark stains on the glass ce-
ramic that cannot be removed do not af-
fect the functioning of the appliance.
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil res-
idues should be removed at once, best tool
for cleaning glass surface is a scraper (not
included with the appliance). Place a scra-
per on the glass ceramic surface at an an-
gle and remove residues by sliding the
blade over the surface. Wipe the appli-
ance with a damp cloth and a little washing
up liquid. Finally, rub the appliance dry us-
ing a clean cloth.
2. Limescale rings, water rings, fat splashes,
shiny metallic discolorations should be re-
moved after the appliance has cooled
down using cleaner for glass ceramic or
stainless steel.
What to do if…
Problem Possible cause Remedy
The cooking zones will
not switch on or are not
functioning.
More than 10 seconds passed
since you switched on the hob.
Switch the appliance on again.
The child safety device is on
.
Deactivate the child safety de-
vice (See the section “Child safe-
ty device ”).
The residual heat indica-
tor is not displaying any-
thing.
The cooking zone was only on for
a short time and is therefore not
hot.
If the cooking zone is supposed
to be hot, call the After Sales
Service.
symbol plus a number
appears on the heat set-
ting display.
Electronics fault. Disconnect the appliance from
the electrical supply for a few mi-
nutes (Take the fuse out of the
house’s electric system) If after
switching on again,
is dis-
played again, call the customer
service department.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact your
dealer or the After Sales Service.
If you operated the appliance wrongly, or
the installation was not carried out by a
registered engineer, the visit from the customer
service technician or dealer may not take
place free of charge, even during the warranty
period.
ENGLISH 8