User manual

Saving a programme
1. Turn on the oven.
2. Set a heating function or an automatic
programme.
3. Press again and again until the
display shows: SAVE.
4. Press to confirm.
The display shows the first free memory
position.
5. Press
to confirm.
6. Enter the name of the programme.
The first letter flashes.
7. Use the shuttle to change the letter.
8. Press .
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold to save.
You can overwrite a memory position.
When the display shows the first free
memory position, use the shuttle and press
to overwrite an existing programme.
You can change the name of a programme
in the menu: Edit Programme Name.
Activating the programme
1. Turn on the oven.
2. Select the menu: Favourites.
3. Press to confirm.
4. Select your favourite programme name.
5. Press
to confirm.
Using the Child Lock
When the Child Lock is on, the oven cannot
be turned on accidentally.
1. Press
to turn on the display.
2. Press
and at the same time until
the display shows a message .
To turns off the Child Lock function repeat
step 2.
Function Lock
This function prevents an accidental change
of the heating function. You can turn it on
only when the oven works.
1. Turn on the oven.
2. Set a heating function or setting.
3. Press again and again until the
display shows: Function Lock.
4. Press to confirm.
To turn off the function, press
. The
display shows a message. Press again
and then
to confirm.
When you turn off the oven, the
function also turns off.
Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press
again and again until the
display shows: Duration.
4. Set the time.
5. Press
again and again until the
display shows: Set + Go.
6. Press to confirm.
Press any symbol (except for ) to start the
function: Set + Go. The set heating function
starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when the
heating function works.
• The menu: Basic Settings lets
you turn the function: Set + Go
on and off.
ENGLISH 21