User manual

Symbol Function
Weight Automatic The display shows that the automatic
weight system works or that weight
can be changed.
Heat + Hold The function works.
Before first use
Warning! Refer to Safety
chapters.
Initial Cleaning
Remove all accessories and removable shelf
supports from the oven.
Refer to "Care and cleaning"
chapter.
Clean the oven and the accessories before
first use.
Put the accessories and the removable shelf
supports back to their initial position.
First Connection
When you connect the oven to the mains or
after the power cut, you have to set the
language, the display contrast, the display
brightness and the time of the day.
1. Use the shuttle to set the values.
2. Press
to confirm.
Preheating
Before first use preheat the oven with only
wire shelves and baking trays inside.
1. Set the function: Conventional Cooking
(Top/Bottom Heat)
and the
maximum temperature.
2. Let the oven operate for 1 hour.
3. Set the function: True Fan Cooking
and the maximum temperature.
4. Let the oven operate for 15 minutes.
Accessories can become hotter than usual.
The oven can emit an odour and smoke
during preheating. Make sure that the
airflow in the room is sufficient.
Using the Mechanical child lock
The oven has the child lock installed. It is on
the right side of the oven, below the control
panel.
To open the oven door with the child lock:
1. Pull and hold the child lock handle up as
shown in the picture.
2. Open the door.
Close the oven door without pulling the
child lock.
To remove the child lock, open the oven
door and remove the child lock with the torx
key. The torx key is in the oven fitting bag.
ENGLISH
12