User Manual

FIXA Cordless screwdriver
TECHNICAL SPECIFICATIONS
Charger input
voltage: Local input voltage
Charger output voltage: 6Vd.c.
Battery voltage/
battery type: 3.6 V lithium-ion battery
Charging time: 5-8 hours
Max. torque: 3 Nm
Max no load speed: 200 rpm
Bit holder: 6.35 mm (1/4")
Vibration (according to EN 62841-1,
EN 62841-2-2):
Screwdriving without impact:
ah=0.2 m/s², K=1.5 m/s².
Noise (according to EN 62841-1):
Noise pressure level Lpa = 58 dB (A),
Kpa = 3 dB (A)
Noise power level Lwa = 69 dB (A),
Kwa = 3 dB (A)
LIST OF FEATURES
The numbering of the product features
shown refers to the illustration no. 1 on
the graphic page.
1. Screwdriver main body.
2. Screwdriver bit holder.
3. Forward/reverse switch.
4. Charging socket.
5. Charger.
Intended use
The electric screwdriver is suitable for the
insertion and removal of screws.
GENERAL SAFETY INSTRUCTIONS
General safety instructions
for power tools
WARNING!
Read all safety warnings and
all instructions. Failure to follow all the
warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in all of the
warnings listed below refers to your mains
operated (corded) power tool or battery
operated (cordless) power tool.
Work area safety
a. Keep work area clean and well
lit. Cluttered and dark areas invite
accidents.
b. Do not operate power tools in
explosive atmospheres, such as in
thepresenceofammableliquids,
gasses or dust. Power tools create
sparks which may ignite the dust of
fumes.
c. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Electrical safety
a. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
ENGLISH 4